HP Laptop Not Charging on Windows 10

When you plug in your laptop, you’ll usually see a joyful scream from your PC, a bright LED indicator light, and a brighter, slightly brighter screen. At least that’s what it’s supposed to do.

However, you may also plug in an AC adapter because the Battery is usually almost dead, and you won’t get anything. There are no bright lights, a backlit screen, and plugged in not charging hp windows 10. What’s wrong?

There are many ways to clean your Battery, but there are some steps and parts between the wall outlet and your computer that can cause problems. Some can be easily fixed with software adjustments or a new battery, but other issues may require a visit to a repair shop or a complete system replacement.

  1. Is it plugged in?

You need to make sure your laptop is connected. Software tweaks and hardware repairs don’t magically turn on a disconnected laptop. Therefore, before doing anything else, make sure your laptop’s AC outlet and plug are appropriately installed.

Check the AC adapter block to make sure the removable cable is fully inserted. Then make sure the battery is properly seated in the compartment and that the battery or laptop contacts are okay.

  1. Battery light

Finally, find out if the problem is related to your laptop. Plug the power cord into another outlet and check if the fuse is blown or blown. If connected to a surge protector or power strip, pull it out and connect it directly to the wall. 

  1. Lose Battery

First, check the integrity of the Battery. If your laptop comes with a removable battery, remove the battery and press and hold the power button for about 15 seconds to drain the remaining power from the device. Then, with the Battery removed, plug in the power cord and turn on the laptop.

  1. Make sure you are using the correct USB-C port.

USB-C is a popular cross-platform standard for connecting peripherals, transferring data, and charging batteries. The new standard allows thinner devices, but it can also be confusing. Some manufacturers choose to make certain USB-C ports data-only so that they won’t charge your device.

  1. Broken USB cable

Inspect the AC brick. Is it discolored? Are there any deformed or expanded parts? Please give it a try-If it smells like burnt plastic. There’s probably a problem there. You may need to replace the power connector. Please contact the manufacturer to see if a new one will be sent during the warranty period. (Or, apart from that, if they sell one to you entirely).

  1. Check the connector

When you plug in the power connector on your laptop, the connection should be fairly solid. If there is dust inside the connector, it may not be possible to connect cleanly. Clean the jack with a toothpick and reinsert it.

  1. Survive the heat

Batteries are sensitive to heat, so overheating your laptop can cause problems. When the temperature rises, the battery sensor can fail, informing the system that the battery is fully charged or completely dead, causing charging problems. The system may also shut down to prevent the battery from overheating and causing a fire.

  1. Please check the settings.

In Windows 10, open the Start menu, search for Power and Sleep Settings, and click Additional Power Settings. (In earlier versions of Windows, open Control Panel and look for Power Options). Click Change Plan Settings to verify that everything is configured correctly visually.

Beware of incorrect settings for battery, display, and sleep options. For example, setting the computer to shut down when the battery level is too low or setting the low battery level too high can cause battery settings problems.

  1. Update driver

Open the Start menu and search for “Device Manager.” Under Battery, you will see several items. Usually, one is for the charger, and the other is listed as Microsoft’s ACPI compliant control method battery, but there are other items. Right-click on each item and select Update Driver. 

  1. Manage device drivers

When the drivers are up to date, restart your laptop and reconnect. If this does not resolve the issue, they recommend you download the latest driver from the manufacturer’s website. You can also completely uninstall and reboot the Battery with Microsoft’s ACPI-compliant controls. This will prompt Windows to reinstall the driver from scratch.

  1. Replace cable and Battery

If the above software tricks don’t work and you can’t solve the problem with the parts you have, you’ll need to buy a new battery or power adapter (this depends on what you’ve narrowed down in), Troubleshooting previous problems procedure).

  1. Internal problems

If all options are exhausted (trying other power cords and batteries, checking and rechecking the settings, and fixing potential software issues), the problem may be in the machine. There is.

Various internal components can cause problems in the event of malfunction or failure. Common causes include motherboard failure, charging circuit damage, and battery sensor malfunction.

Internal problems require specialists, just as a sick person consults a doctor. Contact the manufacturer or your local computer repair shop for warranty repair options.