home improvement

Ways To Unclog Your Pipe In Ways Which Works

Let’s face it, having a clogged pipe or sink is a nightmare! Nobody wants to enter a home that is overflowing and has no proper drainage system. Sadly, however, not everything you see on the internet is meant to work. 

While the internet is flooded with DIY cleaning tips and tricks, they fail to make sense very often. So to save you the time and efforts, we’ve listed a few tried and tested ways to unclog your pipe in ways which work. 

Continue reading as we have a closer look at how you could unclog your pipe the next time you come across such a trouble. 

Ways To Successfully Unclog Your Pipe

Baking Soda & Vinegar 

Baking soda and vinegar is a tried-and-true method for unclogging drains that uses ingredients most likely to be found in your kitchen cupboards.  Baking soda and vinegar mix, creating a neutralized reaction that aids in flushing debris stuck to your bathroom sink’s pipes. 

Simply combine around 1/3 cup of baking soda and 1/3 cup of vinegar in a cup is all that is required. For this mixture to work, you must pour it down the drain right away. After approximately an hour, rinse with hot water. However, if the method fails, ensure that you reach out to professional plumbers Forest Lake area to seek their expertise. 

Hit The Plunger

Did you know that certain plungers are made exclusively for clearing clogs from sink drains? Sink plungers are designed without an end “flange” and instead feature a larger opening for efficient sink cleaning.

Place your plunger over the drain to get started! Once placed, use it like you would flush a toilet to unclog the drain. Be ready to empty and clean the sink after plunging since this may cause obstructions to back up.

Pour In Some Boiling Water

Experts at Alexander Plumbing & Gas suggest that boiling water to unclog a bathroom sink is the most efficient way to clear blockages from your pipes. This technique works well for soap scum blockages and sinks without a lot of water standing in them. 

Bring a pot of water to a rolling boil, then slowly pour the water down the drain as soon as it does. This step might need repeated several times to unclog the drain completely. You may use this technique as much as necessary; boiling water won’t harm your bathroom sink’s pipes.

Some key factors to note before you use the boiling water method: 

  • First off, while this procedure works well for metal pipes, PVC or plastic pipes might not be a good fit. Water that is boiling can soften or deform these substances. Use mildly hot water if you’re unclear about the composition of your pipe.
  • Second, remember that some blockages, especially those brought on by soap scum or grease, respond well to hot water. Boiling water might not work well if a solid object or hair buildup causes your clog.
  • Lastly, handle boiling water with extreme caution to prevent burns. Pour carefully and keep your face and body away from the drain to avoid scorching splashback.


While these were some of the most common and effective ways your pipe could work, don’t forget that these are just DIYs. There might be situations where your clogged drain refuses to work. These are the instances where you should consider calling professional plumbers of Forest Lake. All the best!