Water Leak Detection in Municipal Application Using LoRa Design

January 6, 2023January 7, 2023 dawnwells 0 Comments

In the past, it wasn’t easy for municipal committees to detect water leaks. Water leaks in large buildings resulted in massive monetary losses. Facility managers have to go out in person to check the building from top to bottom to look for water leaks.

But now things have changed. A small sensor can detect water leaks and make difficult work straightforward. The combination of LoRaWAN with IoT has changed the scenario. They help municipal committees to save time and money by detecting water damage signs quickly.

It means the life of building owners and facilities management has become easy.

What Is LoRaWAN Technology?

Before going into the details of how LoRaWAN technology can be used in municipal applications, it’s important to be familiar with what LoRaWAN is. It’s a low-power, wide-area communication protocol that connects sensors to other devices and digital networks.

LoRaWAN technology uses little energy, and it can send and receive encrypted data. Moreover, it shares data wirelessly over a long distance. Another best thing about this technology is it’s interoperable with all kinds of software and networks. Compared to other technologies, it’s relatively new, but it has gained popularity in a very short time.

How LoRa Design Sensors Detect Water Leaks in Municipal Application?

It’s not easy to detect water leaks in large commercial buildings and facilities unless the damage becomes visible. Sometimes the water meter shows a reading when water isn’t in use, and it’s a sign of water leakage.

Small leaks usually go unnoticed, but they have a long runtime and can cause massive damage to property and increase utility bills. Moreover, they make water management systems in buildings inefficient.

When water leaks go unnoticed for a long time, they cause structural property damage. For example, if there is leakage in the upper-floor bathroom, it can be spotted in the ceiling below that bathroom. It means it will require massive work that can be costly and time-consuming.

But with the addition of LoRaWAN technology, detecting water leaks has become easy for municipal committees and building owners. Using LoRa design can help reduce or eliminate repair costs.

LoRaWAN-enabled sensors can be deployed to fittings, meters, valves, fixtures, and all other facilities where leaks can happen. Some people also deploy them on exposed walls, pipes, and ceilings.

These sensors are powerful, and they can easily detect minor leaks. Whenever they detect water leakage, they send alerts to the digital network of the utility. More importantly, the data is shared in real-time, so there is no need to check the facility manually. Finally, actions can be taken immediately; it prevents massive repairs and saves the time and money of the building owner.

How Can LoRaWAN Technology Be Used in Office Buildings?

In a small office building, sensors can be ideally configured in the following facilities:

Bathrooms
Clean facilities
Connection points outside the building
Around the pipe for both supply and waste

Moreover, they should be configured at strategic points throughout the building because valves, fittings, and other potential points in a distribution network can cause leaks over time. Some buildings also have rainwater collection, so sensors should be configured here. It can alert the relevant person when a collector reaches saturation.

LoRaWAN sensors in a building can be connected to a network either remotely or with a network inside the building. As a result, facilities management gets the precise location of water leaks. So, when sensors are used for water leak detection, owners enjoy the following benefits:

Reduced Repair Costs
Increases Building Lifespan
Facilities Management Don’t Need to Check Building’s Status in Person

Can the Right Sensor Make Municipal Committee Life Easier?

Yes, it can. Facilities management is complex and challenging work. It requires heavy labor for constant monitoring.

Moreover, managing technicians and contractors and keeping owners and administration informed isn’t easy. Detecting water leaks is manual work. Therefore, the relevant person has to go into the field to detect the problem and fix it.

Moreover, it’s not easy to see what’s going on inside the pipe. So you can’t predict what’s wrong with it. But now things have changed.

The solutions mentioned above can be used for the detection and prevention of water leakage in homes and businesses. The best thing about these sensors is they can be applied like tape. Moreover, they’re designed in such a way that they can easily fit around pipe joints, valves, and fittings of all sizes and shapes.

They’re smart and capable of detecting minor leaks and sending alerts even when you’re unavailable on the premises. It means technicians and the municipal committee can use IoT technology to maintain infrastructure.

Various companies are offering LoRa wireless design services. Arshon Technology | https://arshon.com/ is one of the leading companies.

Benefits of Using LoRaWAN Technology for Water Leak Detection

Water leaks are major problems for both businesses and property owners. But LoRa-based IoT solutions are effective for commercial and smart home applications. IoT devices are easy to use and designed to gather real-time information. This technology is one of the usages of IoT applications. LoRa wireless technology can help enjoy the following benefits:

Advanced algorithms help combat leaks effectively
Improve efficiency, and customers get strong ROI.
Fix utility waste issues to reduce the waste of natural resources.
Monitor abnormalities in humidity in real time.
Reduce environmental impact.

So, investing in smart technologies seems expensive, but they provide excellent Returns on Investment in the long run.

Final Words

Now you understand the importance of LoRaWAN technology for water leak detection in municipal applications. Moreover, we have discussed the advantages of LoRaWAN technology for facilities management. But you might be wondering who can help with LoRa design services.

Arshon Technology can help design semiconductors, sensors, and chips that can be used for a variety of applications. We have a strong background in LoRa design services. Therefore, we have lots of satisfied clients. Visit https://arshon.com/ for more information.Author: Fatima Hanjani R&D Engineer at Arshon Technology Inc.