Types of Attic Insulation

The most common type of attic insulation is fiberglass batt. This material is made of plastic reinforced with tiny glass fibers. It is available in the form of blankets. The disadvantage of fiberglass batts is that they can irritate the skin and lung tissues. They are also commonly glazed with recycled glass or sand. Choosing the correct type of attic insulation for your home is essential to maintaining its comfort level. For more information, consult a professional.

One of the best types of attic insulation is the fiberglass roll. This material is a blend of glass pieces that are reinforced with plastic. These pieces can be easily transported and cut into the desired lengths. However, this type of insulation tends to be more expensive than fiberglass batts. As with other types of insulation, it is important to know the R-value of the material that you choose. Make sure that the old insulation is removed.


ottawa attic insulation
Ottawa Attic Insulation

The R-value of your attic insulation should be at least R-50. This is the minimum amount that you should purchase, though there are a number of factors to consider. For starters, if you’re considering replacing the old insulation, make sure to get an estimate for its thickness and R-value. It’s also a good idea to remove damaged insulation to ensure that you get the right amount of insulation. You should also check the cost of the materials before making a final decision.

Energy Costs

It is also important to remember that you can save a lot on energy costs when you install new insulation in your attic. Heating and air conditioning units have to work harder to compensate for sudden changes in temperature. By leaving spaces open where these drastic changes occur, your home is left exposed to higher energy bills. It is therefore important to get the right amount of insulation for your home to ensure maximum comfort and energy efficiency. When you’re ready to do the installation, it’s important to measure the depth of the old insulation and estimate the R-value.

While installing new attic insulation is a good way to improve energy efficiency in your home, it’s important to be careful not to do it yourself. Investing in quality insulation will save you money in the long run. A professional attic will help you keep your home comfortable. There are many different types of attic insulation and each type has its pros and cons. So, when you decide to replace your existing attic, be sure to check the R-value before you begin the installation.

The recommended R-value of attic insulation in Ontario is R-50. But, it is important to note that these values are dependent on climate and other factors. If you want to perform attic insulation, make sure you have adequate experience and training. The average homeowner will need between six and eight hours of training for the task. The average contractor will need around two weeks to complete the installation. If you want to save more money, hire an expert for the job.