How To Reducing Slip Risks Using Slip Testing Methods

Slips and trips accidents are the most common type of accidents in the workplace. Every year, they cause over a third of all employee injuries. Major injuries and 95% of major slips result in broken bones or head injuries. They are also the most common cause of fatalities in the workplace.

Many things can contribute to a slip or trip accident, such as:

  • Spilled liquids
  • Uneven surfaces
  • cluttered floors
  • Poorly lit areas
  • Contaminated surfaces

Slips are most common on unclean surfaces because they are harder to detect. Slips can also occur on clean, dry surfaces if they are uneven or cluttered. The contaminated surface doesn’t always have to be wet. Sometimes just dusty surfaces can lead to slips. It’s not always possible to clean up all spills immediately, so it’s important to put up warning signs to let others know about the hazard. You should complete cleaning and regularly sanitizing to keep a clean and safe environment.

Steps To Reducing Slip Risks In The Workplace

Slips and trips are the most common type of accidents in the workplace. However, there are Steps to reducing slip risks at the workplace:

1. Keep the floors clean and dry – Mop up spills as soon as possible, and don’t allow water or other liquids to accumulate on the floor.

2. Fix any loose carpet or flooring – Make sure that all carpets are firmly attached to the floor and that there are no cracks or holes in the flooring.

3. Use appropriate flooring – Use slip-resistant flooring in areas with a risk of slippings, such as kitchens or bathrooms.

4. Wear appropriate footwear – Avoid wearing shoes with high heels or open-toed sandals in areas with a risk of slipping.

5. Be aware of potential hazards – Be careful when carrying liquids or hot food and walk on wet or oily surfaces.

6. Change to the cleaning process can also help to reduce the risk of slips

7. Improve lighting – Ensure all areas are well-lit so potential hazards can be seen. Bright lights and highly polished floors can create glare, so consider using matt finishes to reduce the risk of slips.

8. Use warning signs – Put up warning signs in areas with a risk of slippings, such as wet floors or floor cleaning in progress.

9. Use the correct amount of cleaning chemicals- You must use the correct amount of cleaning chemicals to avoid slips. If too much is used, it can create a slippery surface. If not enough is used, it will be ineffective at cleaning the floor and could lead to a build-up of dirt and grime, increasing the risk of slipping.

10. Entrance matting- Entrance matting can help to reduce the risk of slips by trapping dirt and moisture from shoes. This means that less dirt and moisture are brought into the building, and there is less chance of it being walked on and spread around.

11. Provide training – ensure all employees know how to safely walk on all types of flooring and understand the risks associated with slipping. Slips and trips are the most common type of accidents in the workplace, but by taking these Steps to reduce slip risks at the workplace, you can help to prevent them from happening.

What Are The Slip Testing Methods In The Workplace? 

Slips, trips, and falls are one of the most common causes of injuries in the workplace. And while some of these accidents may be due to factors beyond your control, several slip testing methods can help reduce the risk of slips, trips, and falls in your workplace.

BS 7976 is the British Standard for the measurement of slip resistance. It provides a method for quantifying the slip resistance of flooring materials and surfaces under wet and dry conditions. The pendulum test is the most commonly used method for testing the slip resistance of flooring materials and surfaces.

The slip test measures friction between a floor surface and a standard rubber slider. The test can be carried out on both wet and dry floor surfaces. The slip resistance of a floor surface is reported as the Pendulum Test Value (PTV).

The Tortus test is another method that you can use to test the slip resistance of flooring materials and surfaces. The test measures the frictional force between a floor and a standard rubber slider. The test can be carried out on both wet and dry floor surfaces.

The slip resistance of a floor surface is reported as the Tortus Coefficient of Friction (CoF). The European Standard EN 13893 guides slip resistance measurement using the Tortus test.

In conclusion, slips, trips, and falls are common causes of accidents in the workplace. But by taking some simple precautions and using slip testing methods, you can help to reduce the risk of these accidents.