A man’s bracelet is much more than just a piece of jewelry that goes on your wrist. It can say a lot about who you are, what you do, and how you feel. When it comes to men’s bracelets, there are many styles. In this article, we will tell you how to make a useful braided mens leather bracelet that is a beautiful gift for friends and family. We will learn together to make some interesting leather bracelets. Let’s do it!
Design for braided leather bracelet
In ancient times, men wore leather braided bracelets. Many believe that the bracelets were worn to protect their family and themselves from harm. The tradition of wearing such a bracelet has continued to this day, and it serves as an accessory and as protection or a good luck charm.
You can choose many different designs according to your need when designing your new bracelet – maybe you want something with beads? Maybe you need one in beaded colors to match what clothes you’re wearing? Whatever design suits your fancy, you can follow this easy tutorial.
Materials for braided leather bracelet
There are many important materials and equipment that are needed for making the men’s braided leather bracelet. Some of the major materials are listed below.
- A leather strip whose length is seven times the width of your wrist plus about one inch for overlap.
- Sewing needle that can be used on leather and has a large enough eye to pass through two thicknesses of the material at once, such as an embroidery needle or darning needle.
- Round nose pliers with flat jaws (or bench vice) to hold work in place while the braid is being created with fingers.
- Cutting mat or other surface protection where you will cut out the bracelet pattern from paper templates, which are included below. The cutting mat should have fine grid lines printed on it so you can make sure all edges line up properly when cutting out the design template.
- Braided leather cord (choose colors that goes with the recipient’s personality)
- Scissors or Knife (pointed blade for cutting and blunt one to cut loops in half, though this is optional)
- Ruler or another straight edge (optional).
Leather Quality
One of the best materials for men’s braided leather bracelets is Genuine Leather. Always choose the leather that is smooth, durable, and easy to clean. The color doesn’t rub off easily on your skin or clothes, unlike other types of faux leathers that have a shiny finish. In terms of texture, it has an elegant feel without being too ‘slippery.’ The leather must be made from natural animal skin.
It is important to keep in mind that leather must be flexible, malleable; after all, we will want to braid it. The best ones are those with a rustic style since this is the feeling that leather gives us. Of course, if the leather is colored, the options are more fun since it can be very modern and fashionable.
Method for making the mens braided leather bracelet
Follow the following steps in order to make a leather bracelet. In this article, we are going to do it by showing you how to make leather bracelets step by step and in the simplest way. Once the materials are ready, follow the steps listed below for making the leather bracelets.
- The first thing is to have all the material at hand. It is not convenient that you have to be getting up. You are even less going out to buy something that you lack. Plan your work, and you will increase productivity.
- First of all, you need to measure the size of your wrist. You can do it by wrapping a measuring tape around your wrist and then adding two or three inches to that length, so you have more room (or less if you want it tighter).
- With a ruler, take a strip of leather of about 9 cm. The idea is to wrap your wrist about 3 cm. To cut the leather, use sharp scissors or a utility knife, but very carefully.
- Take the strip of leather that you have cut and glue it to another piece of leather with the glue. It must be bigger than the first one. Try not to have wrinkles and let them dry for eight hours.
- After a time, glue another strip of leather on top and, again, let it dry for another eight hours.
- Once dry, trim the leftovers so that the two subsequent strips remain the same size as the original. The result is a quality, double-sided piece of leather.
- Touch to sew the bracelet. Take the needle and thread and go over the edges so that the three strips are fixed. Try to make it look good, although it will not be easy due to its hardness.
- Take the clasp and glue it to the strip. Let it dry and fix it with the needle and thread, so it won’t come off.
Now your bracelet is ready for daily use. Put the bracelet on your wrist by sliding it down from one end of the braid to the other. The side that has a loose piece of leather should be against your skin when you wear it, and this is how you will tie up your bracelet at night. If desired, loop or twist both ends together tightly for a more finished look before tying them around their knot. You can find an amazing collection of new bracelets at FANCI.ME if you wish to buy a new bracelet for everyday use.
Summary
I hope you like this tutorial in which we try to teach you how to make a braided leather bracelet for men, using step-by-step instructions. You can use this technique to create either an infinity or friendship knot type of braid. It has been said that “the best thing about giving someone something they have crafted themselves” is feeling like you are part of their life.” If you want to give your loved one a great gift, but don’t know where to start, try gifting them a handcrafted bracelet. DIY jewelry is easy and fun because you can make it yourself by following simple instructions.
