What’s the Difference Between Bevel and Chamfer?

Bevel and chamfer are both common woodworking techniques that can create a variety of different looks in your furniture, cabinetry, and other wood pieces. But how do you know which one to choose?

A bevel or chamfer acts as the transition between two surfaces, whether they’re side-by-side or intersecting at an angle, allowing you to cut the edges off while maintaining the appearance of both surfaces meeting in the middle. Though they look similar, there are some significant differences between bevel and chamfer that will help you figure out which one to use in different applications.


A bevel is a cut or edge that has two sloping sides. It creates a V-shaped notch when seen from above. Many woodworking tools, including table saws and band saws, include a bevel setting that allows you to adjust your angle of cut. To sharpen a beveled tool, use an abrasive, fine-grit stone in combination with running water.

Always work from left to right when sharpening a beveled edge. When creating a new bevel, make sure your blade is always at 90 degrees. Start by using a coarse grit stone to remove any nicks or damage on your blade’s edge.

Then move on to a medium grit stone before finishing off with a fine grit stone. This will create an even, smooth surface for cutting without damaging your blade’s delicate metal teeth. If possible, always use water as it keeps dust particles out of your way and helps prevent damage to your blade’s metal teeth.


The chamfering technique is used to remove excess material from a piece of jewelry, usually for aesthetic purposes. This can be achieved by hand with a small file or on a bench grinder. Some jewelers choose to master several techniques, such as chamfering and beveling, in order to provide more flexibility in their work. Many people confuse these two terms, but there are distinct differences between them.

A chamfer is created when you take an angled cut off one side of a stone while keeping it at an angle that doesn’t allow light to enter through it. On its own, a chamfer isn’t particularly useful because it doesn’t allow light into any other part of your design—so if you want to use one, consider pairing it with another shape that allows light into your piece through another opening.

For example, if you have both a square-cut diamond and a rectangular-cut diamond in your design, consider using only one of each so that they create different shapes when paired together.

Advantage of bevel vs. chamfer

A bevel is a cutting tool used to create an edge that tapers towards an end. While a chamfer is also a rounded edge, it doesn’t start with a 90-degree angle like its bevel counterpart. When comparing these two types of edges, one can see how advantages (and disadvantages) of bevel vs chamfer are becoming clearer.

Example 1: The Bottom-Right Corner

The Edge: The Distance From The Corner, Measured From An Extension of A Line Along a Plane At A 90-Degree Angle To The Corner. The Length Of This Edge Is Described Using An Identity Called A Second Principal Measurement. For Example, In Polygons With 3 Sides, You Might Call It The Second Principal Measurement Of Its Length; Or In Polygons With 4 Sides, You Might Call It The Third Principal Measurement Of Its Length.

Example 2: Multiple Corners

Let’s say you need to cut a 45° miter on two opposite sides and then a 22.5° bevel on two others, to create an octagonal frame. To make these cuts, you’d start by cutting the 45° angle first, and then move along to making your bevel cuts. If you want those angles to be consistent, they should follow parallel lines rather than intersecting at one point.

For example: Before you begin cutting anything, draw on your wood using your protractor how much of each angle needs to be cut off for each edge of your project. For More Information Visit Now: