In this post, you will get to know how to boost up your existing internet speed, make it stronger, and enjoy faster and uninterrupted internet speed like never before.
-
Update Security and Cut Off Bandwidth Leeches
Unknown users slow down the internet speed by leeching your bandwidth. If you don’t add extra layer of protection to your home WiFi network, you are opening doors to freeloaders. That is why we recommend all WiFi users to protect their routers, modems, access points, or range extenders with a complex password and also with WPA2 security.
Every connected device uses bandwidth. Remember the more unknown devices use your WiFi, the less likely your home wired or wirelessly devices get bandwidth. Also, if you fail to keep your WiFi network secure, it might give strangers the access to have control over your mywifiext.net login credentials, baby monitors, or automated smart security system.
2. Move Your Router
The location of your router can leave a big impact on the internet signal strength and speed. Positioning the router on a higher and open space with limited obstructions can help in improving signal strength and speed. If your router is placed on the ground, many of your WiFi signals will travel horizontally along the floor and will reach only a fewer parts of your home.
You can improve the internet connectivity by placing and setting up the router at the center location of your home near to modem.
3. Choose a New WiFi Channel
To boost up your internet signal and speed, try switching your router from a standard 2.4 GHz WiFi channel to a 5 GHz WiFi channel. This will result in more bandwidth with less interference.
We recommend you choose 5 GHz WiFi channel for your router. 5 GHz offers 23 non-overlapping channels. Though the 2.4 GHz and 5 GHz frequencies offer multiple internet transmission channels but 2.4 GHz is the only band that offers 14 overlapping channels.
Some WiFi routers are limited to 2.4 GHz band. If your router is also limited to 2.4 GHz, choose channel either 1, 6, or 11.
4. Switch to High-end Extender
The biggest issue behind slow speed of the internet can be your old router. Thankfully, there are a number of advantages to purchase a brand new extender. So, stop thinking about the expense, you’d be investing in faster internet speeds.
A new extender can also give you improved home security features and also be compatible with a wider spectrum of wired and wireless devices. So, stop thinking and get a Netgear extender. There are a variety of Netgear extenders out there. All you have to do is to:
-
Choose a Netgear extender as per your needs and budget
-
Configure it
-
Once configured, connect your devices to its default SSID that would be Netgear_ext, and enjoy surfing the high-speed internet all over your house.
5. Reset Your Netgear Extender and Router
It sounds simple! Sometimes, resetting your router and the Netgear extender can boost up your internet signals. Just as power cycling or restarting your computer, laptop or mobile devices can fix unknown issues, rebooting your router and the extender can alleviate internet connection problems.
To reset your Netgear extender and router:
-
Power them on
-
Ensure to provide your Netgear extender and router a steady power supply
-
Locate the reset hole on them
-
Once found, push the reset hole on your devices using a pin or paper clip
-
Hold the reset hole until the power LED starts blinking
-
Release the reset hole
Thus, your devices reset successfully.
Important
Do not reset your Netgear extender and the router at the same time. Reset your router first. Wait for 5 minutes. Then, reset your Netgear extender.
Once your Netgear extender resets successfully, configure it again by navigating to 192.168.1.250 or www.mywifiext.net and following the instructions mentioned on-screen. To reconfigure your router, contact your ISP or visit your device’s official site.