HP printers offer a commendable printing and scanning performance. It’s possible to connect these printers wirelessly and print. But to do that, you must know about the WPS pin HP printer. This Pin facilitates your printer to link to a wireless network. The WPS technology that HP uses scores over a USB connection in terms of being safer and faster. It safeguards your printer from being used by unknown users.
As a result, you needn’t worry about your printer being hacked. When linking your HP printing device to Windows 10, you’ll receive a prompt asking you to enter the WPS pin. So you must have the knowledge of how and where to find it on your printer. That’s exactly what we’ll explain in more detail here.
Check Also: Write For Us Technology
What is WPS Pin HP Printer?
The WPS Pin(Wi-Fi protected setup) on your HP printer is an 8-digit code that enables wireless connection. This Pin for HP printer makes the establishment of a wireless connection between two or more devices possible. With the WPS technology, you can easily print whenever you want, irrespective of where the printer is placed. It also makes it easier to troubleshoot wireless connections as you only need to input a few numbers and not a complicated Wi-Fi password.
Where Can You Find the WPS Pin on Your HP Printer?
Many HP printer users find themselves confused over the location of the WPS Pin. But there’s no need to be so. This Pin is present on the LED screen of your HP printer. This is true for owners of HP Officejet 4650, HP Envy 4520, and HP LaserJet. Whenever you establish a connection between your printing device and computer, your printer will produce a WPS Pin.
Earlier HP models like HP Deskjet 2600 and HP Deskjet 2652 don’t come with a LED screen. Owners of these models must establish a wireless connection through a WPS Push button between their computer and printer.
Different Methods to Connect Your HP Printing Device
There are chiefly two kinds of WPS connections. You can use one according to your HP printer model and whether it has an LED screen or not.
The first connection type is the WPS Pin, which has been explained above. The second connection type is the WPS Push button.
Establishing Wireless Connection between HP Printer and Computer
Connecting an HP printer wirelessly through a WPS Pin is not difficult. Just abide by the instructions below.
- Begin by switching on your HP printing device.
- Go over to the ‘Control Panel‘ of your printer.
- Once there, press the ‘Wireless‘ button.
- You’ll notice the blue light indicative of wireless starting to flash.
- Head to ‘Settings‘ followed by ‘Network Setup.’
- Choose the ‘Wireless Setting‘ option.
- Tap’ Wi-Fi Protected Setup.’
- Now, adhere to the guidelines on your screen and choose ‘WPS Pin.’
- You’ll see a WPS Pin on the LED screen of your printing device.
- To proceed with printing, you need to input the WPS Pin.
- However, before that, you are required to access the software for the wireless router.
- Head to ‘All Programs.’
- Launch ‘HP folder of printer.’
- After the setup procedure finishes, tap ‘Printer Setup and Software.’
- Install the printer driver by tapping ‘Connect a new printer.’
How to establish a wireless connection in printers without a LED screen?
You cannot use the WPS Pin HP printer if your printer does not have a LED screen. However, you can still connect it wirelessly with the help of the Push button. Here is the process you need to undergo.
- Switch on your HP printing device.
- Hold and press the ‘Wireless‘ button. You can find this button on your printer’s display panel.
- Now, you’ll notice that a green light has started flashing.
- Head to your wireless router. Check its back.
- There will be a WPS button present there. Hold and press this button for a period of 4 seconds.
- You’ll see a WPS light starting to blink.
- Now you must wait for some time till both the router and printer’s light stop flashing. This can take approximately 3 minutes.
- When the light has stopped flashing, it implies that your printer has established a wireless connection to your computer.
- Before proceeding to print, install the HP Smart App on your system.
Can You Use the WPS Push Button If Your Printer Has LED Screen?
Certainly yes. You can use the WPS Push button even if your HP printer has a LED screen. Here is the process of using the Push button.
- Switch on your printing device and head to ‘Control Panel.’
- Now, hit the ‘Wireless‘ button.
- When the blue light flashes, choose ‘Wi-Fi Protected Setup‘ and tap the ‘Push button.’
- Head to your router and hit the WPS button.
- Wait for 3 minutes till the WPS light stops flashing.
- Look at the screen of your printer. There will be a ‘Connection Established’ message.
- Begin printing by installing the app software of the printer on your system.
Summing up
The WPS technology is highly secure, enabling HP printers to print wirelessly. Now you know how to find the wps pin for hp printer on both printer models. If you need more assistance with how to carry out wireless printing, connect with professional HP technical support services.
