The grainer outrigger pad is an industrial safety tool that can be only used with any equipment containing down jacks, outriggers, or stabilizers. It’s a crucial tool required for stability when any equipment, like a crane, lifts any heavy load or personnel aloft.

Outrigger pads become highly functional when used for stabilizing equipment to protect the ground from collapsing and to prevent equipment from toppling over. Remember, that equipment’s stability depends on the equipment’s center of mass and footprint. A footprint is a total area fenced by the support structure of the equipment.

Since many people belong to the industrial field, the purpose of writing this informative post is to enlighten them with the factors how  grainer outrigger pads, protect your equipment, and why it’ highly demanding in the market today.

H1: Basics of Grainer Outrigger Pads

The grainer outrigger pad is placed on the ground surface and below the equipment’s outrigger, shoe, or foot. The size and thickness of the grainer outrigger pad solely depends on the soil conditions of the worksite, type of equipment you’ve been using, , and what kind of task you’re going to perform.

While working with outrigger pads, it’s imperative to know that there’s a minimal point of contact between an outrigger and the ground. Due to the pressure applied by an outrigger pad, the lowered base can be displaced or collapse if workers don’t use the outrigger pads. If any such thing happens, then there are chances that a piece of equipment might tip the load.

This causes the equipment to topple over. Many crane lifting accidents usually happen due to improper use of grainer outrigger pads.

H2: Ways to Use Grainer Outrigger Pads for Equipment Stability

There are two ways of using this outrigger pad to provide equipment with extra stability.

• First, use a counterweight to help shift the center of mass back over the footprint
• Second, to make the footprint bigger with an extendable outrigger system

Usually, all cranes have a counterweight, but there are specific limits or certain parameters of choosing how heavy they can be regarding the transportation and setup considerations.

H3: Primary Considerations While Using Grainer Outrigger Points

Be it grainer, or any other kind of outrigger pad/system, it has to be used as per the manufacturer’s instructions. Following are the primary considerations of using this outrigger pad.

• Before setting up, try to obtain current soil conditions for the work area. Knowing the ground-bearing limit will let the workers figure out what type of outrigger pad would be an ideal fit for current using gear.

• The proper equipment setup and leveling is essential for the smooth functioning of an outrigger pad, regardless of belonging to any style. The operator needs to strictly follow the manufacturer’s chart regarding the allowable level and grade percentage while setting up a piece of equipment. If the level is incorrect, then the lifting capacity of equipment will be reduced.

• Check for current traces, and see where utilities are going above and underground. Try to retain proper clearances around overhead power lines. And, it must also determine the known voltage of overhead power lines and the minimum approach distance required for qualified and unqualified personnel.

• The grainer outrigger pads can’t be used to bridge gaps or spanning voids, as each piece of equipment has different outrigger systems. Workers should know how to set up those systems on each piece of equipment they’re working with.

H4: Common Outrigger Systems

Here’s a brief description of a few standard outrigger pads which usually exist in current equipment.

–     Vertical Pressure Outrigger OR Out-and-down System: This is the most common outrigger pad used for cranes above 40-ton.

–     A-frame or 45-degree Outrigger Systems: This outrigger pad is usually found with bucket trucks and digger derricks. You might also discover the combination of both A-frame and out-and-down outrigger systems on many boom cranes, starting from 30 tons to below.

–     Down Jacks: They’re typically found on trailers and heavy-haul equipment.

H5: Get the Super Quality Outrigger Pads for Sale from Prime Tech Pads, But Why Only from Us?

Because, we have outrigger pads with sustainable materials! At Prime Tech Pad, all grainer outrigger pads are US-made with 100% recycled plastic materials (UH MW/HMW). Also, our outrigger pads for sale are widely demanded in the market for their strength verified by an independent lab.

 We manufacture high-quality crane pads in various sizes for the safety of your team, your equipment, and your project. Contact us today!

• First, use a counterweight to help shift the center of mass back over the footprint
• Second, to make the footprint bigger with an extendable outrigger system

Usually, all cranes have a counterweight, but there are specific limits or certain parameters of choosing how heavy they can be regarding the transportation and setup considerations.

H3: Primary Considerations While Using Grainer Outrigger Points

Be it grainer, or any other kind of outrigger pad/system, it has to be used as per the manufacturer’s instructions. Following are the primary considerations of using this outrigger pad.

• Before setting up, try to obtain current soil conditions for the work area. Knowing the ground-bearing limit will let the workers figure out what type of outrigger pad would be an ideal fit for current using gear.

• The proper equipment setup and leveling is essential for the smooth functioning of an outrigger pad, regardless of belonging to any style. The operator needs to strictly follow the manufacturer’s chart regarding the allowable level and grade percentage while setting up a piece of equipment. If the level is incorrect, then the lifting capacity of equipment will be reduced.

• Check for current traces, and see where utilities are going above and underground. Try to retain proper clearances around overhead power lines. And, it must also determine the known voltage of overhead power lines and the minimum approach distance required for qualified and unqualified personnel.

• The grainer outrigger pads can’t be used to bridge gaps or spanning voids, as each piece of equipment has different outrigger systems. Workers should know how to set up those systems on each piece of equipment they’re working with.

H4: Common Outrigger Systems

Here’s a brief description of a few standard outrigger pads which usually exist in current equipment.

–     Vertical Pressure Outrigger OR Out-and-down System: This is the most common outrigger pad used for cranes above 40-ton.

–     A-frame or 45-degree Outrigger Systems: This outrigger pad is usually found with bucket trucks and digger derricks. You might also discover the combination of both A-frame and out-and-down outrigger systems on many boom cranes, starting from 30 tons to below.

–     Down Jacks: They’re typically found on trailers and heavy-haul equipment.

H5: Get the Super Quality Outrigger Pads for Sale from Prime Tech Pads, But Why Only from Us?

Because, we have outrigger pads with sustainable materials! At Prime Tech Pad, all grainer outrigger pads are US-made with 100% recycled plastic materials (UH MW/HMW). Also, our outrigger pads for sale are widely demanded in the market for their strength verified by an independent lab.

 We manufacture high-quality crane pads in various sizes for the safety of your team, your equipment, and your project. Contact us today!

Be it grainer, or any other kind of outrigger pad/system, it has to be used as per the manufacturer’s instructions. Following are the primary considerations of using this outrigger pad.

• Before setting up, try to obtain current soil conditions for the work area. Knowing the ground-bearing limit will let the workers figure out what type of outrigger pad would be an ideal fit for current using gear.

• The proper equipment setup and leveling is essential for the smooth functioning of an outrigger pad, regardless of belonging to any style. The operator needs to strictly follow the manufacturer’s chart regarding the allowable level and grade percentage while setting up a piece of equipment. If the level is incorrect, then the lifting capacity of equipment will be reduced.

• Check for current traces, and see where utilities are going above and underground. Try to retain proper clearances around overhead power lines. And, it must also determine the known voltage of overhead power lines and the minimum approach distance required for qualified and unqualified personnel.

• The grainer outrigger pads can’t be used to bridge gaps or spanning voids, as each piece of equipment has different outrigger systems. Workers should know how to set up those systems on each piece of equipment they’re working with.

H4: Common Outrigger Systems

Here’s a brief description of a few standard outrigger pads which usually exist in current equipment.

–     Vertical Pressure Outrigger OR Out-and-down System: This is the most common outrigger pad used for cranes above 40-ton.

–     A-frame or 45-degree Outrigger Systems: This outrigger pad is usually found with bucket trucks and digger derricks. You might also discover the combination of both A-frame and out-and-down outrigger systems on many boom cranes, starting from 30 tons to below.

–     Down Jacks: They’re typically found on trailers and heavy-haul equipment.

H5: Get the Super Quality Outrigger Pads for Sale from Prime Tech Pads, But Why Only from Us?

Because, we have outrigger pads with sustainable materials! At Prime Tech Pad, all grainer outrigger pads are US-made with 100% recycled plastic materials (UH MW/HMW). Also, our outrigger pads for sale are widely demanded in the market for their strength verified by an independent lab.

 We manufacture high-quality crane pads in various sizes for the safety of your team, your equipment, and your project. Contact us today!

Published by: TSP Cleaner