Top Reasons to Keep Your Engine Clean

One of the most affordable and effective ways to maintain your aircraft engine is to wash it on a regular basis, both inside and outside. Here are some of the important points to ensure effective washing and optimal engine performance.

Contaminant in the air

The environment is filled with contaminants like fine particles of dirt, oil, soot, and other things. These contaminants may get sucked into engine compressors with air, especially if you do not install a filtration system. These contaminants may build up and form a coating on the casing, vanes, and compressor blades. They may reduce aerodynamic efficiency that results in deteriorating performance. Sulfidation and other contamination can also corrode engine components.

Clean engines run better

You will get an amazing result when you use a little soap and water to clean the engine. Washing your engine includes several benefits such as it improves compressor efficiency, boosts internal turbine temperature margins, reduces fuel consumption, maximizes the lifespan of hot section parts, and reduces corrosion. It also enhances your engine’s performance and lifecycle, extending the time between overhauls. It is important to perform regularly cleaning in order to keep your engine performing at its best.

Compressor washes are important

Compressor washes help in reducing corrosion in bad weather. When it comes to washing, inject applicable cleaning fluid into the engine intake with the help of an installed compressor wash ring or a hand-held wash wand. Using regular compressor washes, you can preserve the health of mechanical components to remove salt, dirt, and othddr deposits that accumulate in the gas path. When it comes to PW100 engines, water could get into the P3 line of the mechanical fuel control system unit in order to disconnect the P3 air pressure sensing tube at the intercompressor case end and add a plastic bag in the tube as recommended in the engine maintenance manual.

Other aircraft engine cleaning

External surface washes can eliminate corrosive build-up and make sure the soundness of epoxy coatings on magnesium surfaces. Turbine washes can reduce corrosion in harsh weather. By using a wash nozzle or modified borescope tube in order to wash high-pressure blades with drinking-quality water. It is not essential to disconnect fuel drains, P3, or handling bleed-off valve lines, while an engine-drying run is optional.

In short, it is important to do a performance recovery wash when there is noticeable engine performance loss or trend monitoring shows it is essential. Use approved chemical additives in order to remove more stubborn deposits that can be eliminated during normal desalination washes.

Different types of techniques and methods are used to wash the engine in which EcoPower engine wash is highly popular. It is a closed-loop system that can protect the environment and provide a mobile, fast, efficient, and effective process. Deionized, heated, and atomized water can be sprayed to clean the engine components. There are no toxic chemicals or detergents that can be used. The water can be collected and filtered to produce pure, deionized water for reuse. Minimal waste can be approved by airport environment authorities throughout the world. Hence, EcoPower can be performed in order to reduce the requirement to tow the aircraft to a remote location.

There are a number of professionals that specialize in providing superior results using patented advanced wash technology as well as an environmentally friendly process. They use pure deionized hot water to maximize the performance of the engine for years. Simply get in touch with a reliable service provider to get ecopower engine washes and enjoy the benefits of better performance.