Drivers have their tyres changed from now and then for a variety of reasons. Most of the time, it’s because they’re switching from winter to summer tyres or vice versa. You can store your tyres at home or at a professional storage facility if they are still in perfect shape for next summer or winter.
Many drivers, however, chose to store their tyres inside their own basement or garage if they have the appropriate conditions. Both options have advantages and disadvantages, but remember that preservation is essential for prolonging the life and condition of your tyres so that they last for years.
Guide to Proper Tyre Storage
Keep them Clean
Before storing tyres, clean them with detergent, water, and a tyre brush. This will assist in the removal of a month’s worth of road sludge and brake fluid. If you store your tyres on wheels, clean them as well. Before moving on to the next step, ensure they’re completely dry. You can also contact Car Tyres Northampton for assistance with your tyre storage.
No need for Dressing
Instead of taking action, the next step necessitates inaction. Prior to storage, there is no need to apply any kind of clothing or gloss product to the tyres. Tire compounds are designed to withstand ozone cracking and other forms of climate change stress. Such products can actually shorten the life of your tyres rather than help them last longer.
Place them in a Bag
To fit each tyre, find a huge, airtight plastic bag. Consider using yard bags or leaf bags. After making sure the bag and tyre are both dry, eliminate as much air as possible from the bag and tape it sealed. Oil evaporation from rubber substances will be reduced in this airtight environment. There are also specific tyre storage caddies or tyre totes available. These make it easier to transport and store tyres while also keeping them clean and dust-free. They are not, however, airtight. If you want to use them, first bag the tyres as described above, and then put them in your tyre tote.
Select a Location
Tires should never be stored in the open air, even if they are covered, whether it is cold or hot outside. The location should be cool, dry, and well-ventilated and out of the sun, of course. It’s best to keep it in your basement or some other climate-controlled area. If the room has a heat source, the tyres must be protected from it. Temperatures, humidity are all factors in most garages, sheds, and attics.
White Rubber should be Protected
In case your tyres have whitewalls or other white components and If you don’t want to bag your tyres, store them with the white areas touching each other and the black areas touching each other. This is why, on the white side, the black rubber is compounded in a different manner than the black rubber on the other edge. On the white side of the tyre, a surface of a non-staining black rubber is being used to avoid oils from migrating from the black to the white areas and allowing discolouration. Standard rubber is used on the black sidewall.
Consequences of Incorrect Tyre Storage
Tyres age over time, whether they are used or not. As a result, even while being preserved, some of the substances’ and compounds’ essential properties may fade. This can cause noticeable differences in performance. There are several things that can happen as a result of improper tyre storage, including:
- The tyre’s physical properties can change such as deformed sidewalls, beads, or tread areas.
- The tyres’ life expectancy can get reduced.
- In serious situations, tyre damage may be severe enough to render the tyre useless.
However, it’s also a good idea to check the age of your tyres before storing them, as older tyres might already have begun to lose their properties. Check the tyre date on the sidewall to see how much longer you can utilise your tyres. 4×4 Tyres Northampton also offers a great deal in case you want to store your tyres at professional storage.
Finally, the most serious physical and chemical changes in tyres occur primarily as a result of their use, with underlying heating and tension being the most likely causes. These are usually caused by inflation, pile, deflection, and impacts, which do not take place when the item is stored.
