Having an idea about which factors can make your car fail in the MOT test will help you a lot whether you have your compulsory MOT due or are looking for an MOT test voluntarily. Simple request repairs and maintenance job can be completed with such knowledge. This will ensure that the vehicle will pass the MOT test successfully.
This article will offer all the common MOT failures and tips for preventing them so that you can have your MOT test done successfully with all required knowledge.
Worn Braking Pads
You need to maintain your braking in efficient condition, especially during wet weather when the braking distance increases. The tell-tale indications that you may fail your MOT Loughborough are the squealing and grinding noise while applying brakes.
You need to remove the wheel and check your brake pads visually. Your wheel spokes can let you observe the brake pads on most vehicle models and makes. Your brake pads should be thick and smooth to appear. If you don’t find them to be so, you need to get them replaced immediately.
You may not pass the test because of your car’s handbrake apart from the brake pads. You need to park the vehicle on an inclined plane and apply the handbrakes to test them easily. If the car is not held by it efficiently, it needs to be adjusted.
Blown Bulbs
For upholding safety on the road, the signalling and lighting capacities in a vehicle play a crucial role. You can’t be visible in rough weather conditions or be visible at night without your signals or lights. You can’t also communicate with other users on the road without them.
Issues in signalling and lighting are one of the major causes of MOT failure. Many avoid this issue very easily. You must inspect that all the indicators and light in your car are working efficiently before you make a visit to the MOT test. You must not also forget to check the light of the number plate. Your indicators and lights must be clearly seen. You must clean your lenses properly even if your bulbs are working efficiently.
Low Tread in Tyre
You must check your tyre condition regularly. For road safety, your tyres tread depth and tyre pressure are crucial. Thus, it is obvious that you can fail in your MOT test with low tread depth. With low depth in the tread, you will have to pay a fine and also be at risk on the roads.
Apart from this, your tyre condition must be observed. If your tyre has lumps or cuts, it can be dangerous. You need to fix them immediately to minimise the chances of MOT failure and tyre blowout on the road.
Bad Suspension
With more exposure to potholes and kerbs, you make your suspension system more susceptible to issues that can lead to MOT failure. Just by having a look at the under part of the vehicle, you can’t just trace any issue in the suspension system. This indicates that you must turn your ears to any sounds while driving for tracing any potential issues in suspension. You must identify whether your car makes any clunking noise especially while driving or cornering on irregular surfaces.
When your car is in a stationary condition, suspension issues can be traced. A particular wheel in your car is affecting a specific wheel if your car feels too low or high in one corner. Just by pushing down on every corner of the vehicle, your suspension can be tested easily. Your suspension may not be in an efficient condition if it returns to the resting state after bouncing many times. This may make you fail MOT Loughborough.
Obscured Windscreen
Every driver in a vehicle must have a clear view of the road while driving. You can fail in the MOT with an obscured view irrespective of if your view is obstructed by a huge car air freshener or your sat-nav. You can also fail the MOT if the windscreen has been damaged including chips and cracks at the eye level of the driver. Currently, getting the cracks and chips fixed due to the latest repairing technology of windscreen. Apart from this, the wipers of your windscreen work efficiently and must contain washer fluid to clean completely as well as ensure proper visibility.
