Reasons Why Your Clothes Come Out of The Dryer Still Damp
Conclusion
Most people tend to take appliances such as dryers and washing machines for granted. However, when it stops working as expected due to some reason, we are reminded of just how much we depend on such appliances. A dryer can dry your laundry much faster than if you simply hang them on a clothesline. Thus, when it stops working and your clothes come out wet or damp, it can be a very frustrating experience. If you suspect that your dryer has gone bad and needs repair, search for âdryer repair near meâ online to seek professional help.
Here are a few reasons why your clothes may come out of the dryer still damp
There can be a number of reasons why your laundry isnât drying properly or not drying at all. It could be due to a single factor or multiple factors. However, we have listed the most common factors that cause the dryer to malfunction and which you can identify to fix the issue.
1. Lint build-up – Itâs important to check the filter of your dryer for the accumulation of lint or debris to keep it in top working condition. Without proper cleaning of the dryer filter after every wash cycle, it can start to collect lint and debris which prevents air circulation. As a result, it prevents the passage of hot air inside the dryer which prevents the clothes from drying properly.
The best way to fix the issue is to check the lint trap after you use the dryer every time and clean it thoroughly. Lint traps are fully removable. Thus, to clean the lint trap of your dryer, you just have to pull out the wire mesh that collects the lint and clean it properly. Be sure to look inside the slot as well for any signs of hair fluff or other debris. And, if you notice any lint, clean it before reattaching the lint filter to the slot.
2. The heating element is broken – Every dryer has a heating element, typically, a heat-sensing thermal fuse that causes air to become hot which results in the drying of wet clothes inside it. However, if the heating element malfunctions, the dryer would not work properly and wonât dry wet clothes.
The heating element in electric dryers is generally a long coil of wire. After prolonged use, it may get burned and damaged. The thermostat of the dryer may also get bad. In such cases, you may notice that the vent is clean, and the dryer is tumbling but it is not heating. In the case of gas dryers, they include an igniter that lights the gas as it comes out of the valve. In both cases, you have to replace the heating element.
The best way to test whether the heating element of your dryer is working properly is to let the dryer run without putting any clothes in it for 3 to 5 minutes. Once the cycle ends, open the door and test whether the drum is warm or not. If itâs not warm, there is nothing you can do and you have to call a technician.
3. The air vent is clogged– One of the common reasons for malfunctioning dryers is a clogged air vent. The ducts and vents provide smooth airflow inside the dryer and allow hot air to pass without any obstruction. However, the changing seasons and constant use can clog them up with lint, debris, and more. For instance, they may accumulate freezing water during the winter or dry leaves during the autumn. As a result, it can severely clog the outside air vent and the internal duct of the dryer and cause it to malfunction.
A clogged dryer vent can cause household fires and become extremely dangerous if you keep trying to use it in such a condition. You may use a clothes hanger to unclog the air vent or simply call a professional dryer repairman.
4. The dryer is over-capacity – If you stuff too many clothes inside your dryer, you can overfill it without realizing it and bring it to overcapacity. As a result, it may not be able to spin as efficiently as normal or wring out excess water which results in wet clothes. This makes sense because if your clothes donât have enough room to tumble inside the dryer, they wonât be able to air-dry inside the machine. Thus, always make sure that your dryer has enough room for tumble and air circulation. Hopefully, it would solve the problem.
5. Unadjusted settings – If you notice that lighter loads such as t-shirts dry well but heavier loads such as jeans donât dry well, you just have to adjust the âdry levelâ in the settings options. Typically, you need to set the âdry levelâ to a high setting to dry heavier loads.
6. Mixed loads – Putting mixed loads such as t-shirts and jeans in the same dry cycle is not an optimal way to dry the clothes. In such cases, the t-shirts would tend to stay in front of the drum while jeans would tend to stay at the back of the drum. As a result, when the sensor bar notices that your t-shirts have become dry, it would end the cycle. However, your jeans would remain wet since they take longer to dry.
7. Too little load – Sometimes, the dryer sensor may not work properly if you add too little clothes in a load cycle. Try adding a few extra garments to the load and see whether the clothes dry properly the next cycle.
The best way to fix the problem is to seek professional help. However, in case of emergencies, you need to come up with
Conclusion
If you couldnât find the root cause of the problem and werenât able to fix it, search for âdryer repair near meâ on Google to find a professional dryer repairman. A professional dryer repairman would be able to detect the problem fast and fix it.
