Robots are always made of plastic or metal components. When your robot needs to be repaired, cleaning or to be re-homed, you need to replace damaged plastic or metal components. In some industries, replacement parts are not possible. Even in those industries, cost is a problem. So, you need to repair or replace the parts with the least cost and the least trouble. Robot protective covers are used to prevent damages due to penetration or abrasion and to protect the remaining plastic or metal parts. Let’s see other reasons of using robot protective covers:
Protects from Dust
When you use protective covers on the robot, the robot parts are protected from dust and air leakage. The more you use the protective covers, the less the dust can be seen and the fewer chances are of dust invading into the robot. The rubberized covers are made of high-strength rubber with low weight. They protect the robot parts from damage caused by water and dirt. You can go to https://evotec.group/ to get protective covers for your industrial robots.
Improves Security
When you use the robot protective covers, you need to connect your ID (a robot’s ID chip or a robot sticker), which are the “key” to your robot. Therefore, you have to know exactly which item belongs to which robot. This is very important for maintenance. With the help of robot protective covers, you can hide the tag on the robot to keep it private. These covers also increase security of your robots from theft.
Improves Durability
When you use protective covers on the robot, the parts are protected from damage, impact, etc. Some companies use low-cost plastic covers on their robots, which tends to break at the first impact. You can avoid all this by using protective covers. After using protective covers on your robots, their parts do not require maintenance for a long time. The parts of your robots will remain intact for a long time. The protective covers protect the robot from breaking even in the case of a hard impact. In the case of air leakage, when the inner cover is removed, the air comes out from the robot. Then you need to vacuum the air out. The clean air comes back into the robot from the outer cover, which is in contact with the inner cover. This helps the robot to run without any mechanical difficulty.
Robotic Platform
Robot protector covers may be used on other robotic platforms, too. If you apply the same protective covers on different robot platform, then they will protect the platform from damage caused by external elements. Robot protector covers are lightweight. This makes it easier to transport, so it can be used by field technicians, and it can be applied easily at the site of the operation.
Final Frame:
People sometimes feel that robot covers are expensive, but their cost is minimal if you take into account the cost of replacement parts. Once you do not have any protective covers, then you need to invest in regular maintenance of your robot.
Robot protection covers are quite simple to apply. You only need to remove the protective covers from your robot, and you have to put them back on. Some robot protection covers can be used in any position on the robot. You just need to put them on the desired position and to open the main parts of the robot.
EVOTEC is a company that provides solutions for robot protection and maintenance. EVOTEC products are well-known for their high quality and the durability of the protective covers. The company manufactures protective covers for all kinds of robots, from large robots to small robots.
