Reasons to have Work Wear Safety Shoes

Safety footwear is essential to prevent the risk of foot injure around job sites. According to the National Safety Council, only one out of four victims of job-related foot injury wear any type of safety shoes or boots. The remaining three are unaware of the benefits of protective footwear.

Falling objects crush

When carrying heavy materials in a chaotic workplace, such as a construction site. Falling objects is one of the main hazards that cause foot injures. Safety toe boots, thanks to their pounds bearable toecap can effectively prevent crush injuries to the feet. If there is also a risk of objects falling on the instep, then pick safety footwear with metatarsal protection (marked “MT”).

Sharp puncture

Stepping on sharp objects will pierce a hole in the outsole, and injure happens when the objects reach the foot. Work boots equipped with a puncture-resistant layer offer the best protection. In construction places, for example, there may be sharp items on the ground, such as protruding nails, and pointed needles. Sports shoes can not provide sufficient protection.

Slipping and falling

Slipping will cause fracture and ankle sprains, falling will lead to fatal injuries such as spine fracture, Neurological blindness, and Cerebral hemorrhage… Wear highly slip-resistant safety shoes can effectively reduce the risk of such hazards. It’s also worth mentioning that the risk of greatly increases if you don’t wear slip-resistant safety shoes. The only test he has found that provides reasonably meaningful information on footwear and floors under worksite-specific slippery conditions is ASTM F16-77. The F16-77 test will determine if a shoe will meet a 0.25 slip-resistance rating. This minimum acceptable rating measures the horizontal-to-vertical force exerted when the average person puts down his foot.

Reduce fatigue

Safety shoes are built in ideal foot form for those who work standing all day, Safety shoes are designed according to the structure that suitable for standing support, which can reduce calf and knee pain. A pair of rigid insoles will also have this effect. Note here that flat feet will be more suitable for insoles with a little support at the arch of the foot, high arches The feet are more suitable for insoles with higher curvature and more support

Electric shocks

Electricity is obviously a serious hazard in many workplaces,  it is vital that wearer wear the EH safety shoes made of non-conductive materials such as leather and other artificial materials to prevent electric shock. Work shoes that passed ASTM tests in an 18000-volt environment are called EH shoes, You can find EH sign on the ASTM mark inside the shoe.

The OSHA standard ( 29 CFR 1910.136) for protective footwear state that it is up to the employer to make sure that each affected employee uses protective footwear when working in areas where there is a chance that foot injuries can occur due to falling or rolling objects, objects piercing the sole and where they are exposed to electrical hazards. To ensure you have top-level protection in your work environment, an effective fit and selection of safety footwear are required.

Safety footwear company produce safety shoes with the same shoe lasts of their own, that means one size does not fit all feet and there are no 100 % comfortable work shoes. So how does a worker select his safety boots? You can find a good pair on https://rockroosterfootwear.com/

Safety boots should offer room to wiggle your toes(about 0.5~0.7 inches). Try them on at the end of the day (after feet swell) and with the socks, you plan to wear. Know your heel is not sliding more than 0.5 cm, Fit issues to share with your footwear specialist: You don’t want to feel odd bumps or seams or pinching in the forefoot, nor toes hitting the end of the boot when it’s on an incline. If the boots are laced firmly and you still feel space above the top of your foot, then the volume of the boot is unfit. your feet should not feel any squishing or tightness. Try on boots at the end of the day. Your feet normally swell a bit during the day’s activities and will be at their largest then.  And most of all, please find the ASTM mark on the safety shoe and OSHA standard of your workplace. This prevents the wrong buying.

According to the OSHA policy. The employer should do a hazard assessment of the work environment to determine when and how employees are exposed to foot injury hazards and how to protect them. The assessment is an important element of personal protective equipment because it produces information needed to select the appropriate footwear. Matching the correct footwear to a specific workplace can improve safety and reduce risks. Just as with other types of personal protective equipment (PPE), many work environments and hazards require specific types of footwear if workers are to be properly protected.

Falling objects crush

When carrying heavy materials in a chaotic workplace, such as a construction site. Falling objects is one of the main hazards that cause foot injures. Safety toe boots, thanks to their pounds bearable toecap can effectively prevent crush injuries to the feet. If there is also a risk of objects falling on the instep, then pick safety footwear with metatarsal protection (marked “MT”).

Sharp puncture

Stepping on sharp objects will pierce a hole in the outsole, and injure happens when the objects reach the foot. Work boots equipped with a puncture-resistant layer offer the best protection. In construction places, for example, there may be sharp items on the ground, such as protruding nails, and pointed needles. Sports shoes can not provide sufficient protection.

Slipping and falling

Slipping will cause fracture and ankle sprains, falling will lead to fatal injuries such as spine fracture, Neurological blindness, and Cerebral hemorrhage… Wear highly slip-resistant safety shoes can effectively reduce the risk of such hazards. It’s also worth mentioning that the risk of greatly increases if you don’t wear slip-resistant safety shoes. The only test he has found that provides reasonably meaningful information on footwear and floors under worksite-specific slippery conditions is ASTM F16-77. The F16-77 test will determine if a shoe will meet a 0.25 slip-resistance rating. This minimum acceptable rating measures the horizontal-to-vertical force exerted when the average person puts down his foot.

Reduce fatigue

Safety shoes are built in ideal foot form for those who work standing all day, Safety shoes are designed according to the structure that suitable for standing support, which can reduce calf and knee pain. A pair of rigid insoles will also have this effect. Note here that flat feet will be more suitable for insoles with a little support at the arch of the foot, high arches The feet are more suitable for insoles with higher curvature and more support

Electric shocks

Electricity is obviously a serious hazard in many workplaces,  it is vital that wearer wear the EH safety shoes made of non-conductive materials such as leather and other artificial materials to prevent electric shock. Work shoes that passed ASTM tests in an 18000-volt environment are called EH shoes, You can find EH sign on the ASTM mark inside the shoe.

The OSHA standard ( 29 CFR 1910.136) for protective footwear state that it is up to the employer to make sure that each affected employee uses protective footwear when working in areas where there is a chance that foot injuries can occur due to falling or rolling objects, objects piercing the sole and where they are exposed to electrical hazards. To ensure you have top-level protection in your work environment, an effective fit and selection of safety footwear are required.

Safety footwear company produce safety shoes with the same shoe lasts of their own, that means one size does not fit all feet and there are no 100 % comfortable work shoes. So how does a worker select his safety boots? You can find a good pair on https://rockroosterfootwear.com/

Safety boots should offer room to wiggle your toes(about 0.5~0.7 inches). Try them on at the end of the day (after feet swell) and with the socks, you plan to wear. Know your heel is not sliding more than 0.5 cm, Fit issues to share with your footwear specialist: You don’t want to feel odd bumps or seams or pinching in the forefoot, nor toes hitting the end of the boot when it’s on an incline. If the boots are laced firmly and you still feel space above the top of your foot, then the volume of the boot is unfit. your feet should not feel any squishing or tightness. Try on boots at the end of the day. Your feet normally swell a bit during the day’s activities and will be at their largest then.  And most of all, please find the ASTM mark on the safety shoe and OSHA standard of your workplace. This prevents the wrong buying.

According to the OSHA policy. The employer should do a hazard assessment of the work environment to determine when and how employees are exposed to foot injury hazards and how to protect them. The assessment is an important element of personal protective equipment because it produces information needed to select the appropriate footwear. Matching the correct footwear to a specific workplace can improve safety and reduce risks. Just as with other types of personal protective equipment (PPE), many work environments and hazards require specific types of footwear if workers are to be properly protected.