We have seen all the printers work, as magic, as you introduce a paper and then leave with drawings, posts, and forms if you are one of the lifestyles, telecom Believe in the phone and other sorrow and you are saying that we will do today in the publication. Breaking all the magic indicators and we will talk about how printer’s ink cartridges work and even we will put them in their structure, today we have science. Visit Our website Super image ltd
How does ink cartridge work?
Basically, this process is more complicated than you, ink cartridges contain three basic elements, micro-coils, a movie that makes these three tasks heating for the magic of print and resistance, but how Are you?
It works in such simple terms: Resistance heats thin film in 100 degrees in each other, therefore stores a bubble in steam and ink, which spreads ink through micro-specifications and it Executes. Thousands of times as long as this photo is being printed.
So, if you want to sell ink cartridges for a cash click here
Types of ink cartridges
There are four types of printers and cartridges that are most used by manufacturers around the world, below I present them:
Types of cartridges
Sponge cartridges
This is the easiest way to maintain ink, resulting in the ink inside the ink. The manufacturer is responsible for adjusting the viscosity of ink and force, with which the ink sponge system correctly functions.
Sponge cartridge with ink tank
It is one of the systems that are included by printer manufacturers such as Canon because it allows maximum storage of ink and performance. Here mainly does not change the use of a sponge, but it helps print heads to reach ink.
Internal ventilation cartridge
These cartridges are maximizing ink and therefore most likely to face performance, but its operation is being complicated and rechargeable because it is not done if it is carefully done correctly, So the cartridge will not work all ink.
This work is amazing, true, true, through the pressure created by metal support and airbags? It is a very important technology within the small color box.
Bag system cartridge
This is the way that promotes the life of the cartridge, a very novel system that consists of closing ink in a bag that does not allow under the amount of air in any case, so it will not be dry. The. But you have to be careful about charging it again.
By technology employee for printing
To eliminate the lack of ink by demand, be able to make the exact moment and pictures at the right place. The printers are a car that challenges the appointment and right-left, the exact ink in the exact site of the day is still working with two technologies, these are other for thermal principles and piecemactic principles. Now we will enter each of them to explain.
Thermal
Also known as bubble jet technology, it is one of the most used technologies to print ink, world manufacturers use the large scale HP, Lexar, and Cannon in their printers. The. It was studied at the same time by two engineers since the discovery of this technology, who worked in companies working in competition companies, John’s HP and Cannon’s IRO Worked by Ando. Canon discovered him in 1977 by touching a syringe with a welder and separating the ink, in 1978, HP discovered that it fell on resistance without maximum coating (so they were hot) Come out.
There are different tubes based on the principle inside the cartridge that they plan drops. In the interior of each of these tubes, resistance is inserted by photography. When the printer wants to reduce the ink to extract by cartridge when they send pulse in the resistance of tube, it is hot and causes the rapid vaporization of ink, which is a bubble on this point, bubble There is a bubble part of the ink between the pressure bubble and the shot out of the shot, for this, the name of the bubble jet which put Canon. The same pressure which has worked ink as ink sub-buttons ink, which is on the cartridge in the camera where the resistance is resistant, then filling this ink cavity and preparing it for the next drop. This type of ink can be both water and sun, if you are generally you will have to be a steady component to make a bubble.
This type of head is not needed, if there is technology, it is more economical to generate other printing methods.
Buy ink cartridges
The purchase of ink cartridges has become a difficult task for many of the following reasons and the manufacturers of printers have much to do with OEM cartridges manufacturers.
Ink cartridge and tuner prohibited value.
Buying an ink cartridge or toner cartridge is expensive, is very expensive, and if you are made of a printer manufacturer, you will list one of the main reasons for this price.
Because they sell printers at higher than engineering and production cost! They just put the value of manufacturers and the cost of R & D is put in use (ink cartridges, toner, drum, etc.).
In this way, they do not dump, which is not illegal, but they usually get the cost of the increase, because people do not normally look at the cost per page or apply their cost, only printer Look at the price. Take advantage of it. There are more printers that they sell they take a special cartridge that is not marketed and it prints very few pages, usually half, compared to cartridges.
Another reason for high prices is by all circuits that make cartridges so that other manufacturers can not copy them. To use the printer’s agriculture parts, (especially electrical parts, chips, and circuits) manages the amount of black instead of the quantity of chip pages counter, or chip.
To another industry, imagine that they make up on the wheels of your car to make themselves fuel control computers to sell wheels, it will be scandal worldwide, but It is clear that the usable industry is not serious.
Thousands of references you have to find you. One of the worst perspectives of the industry and the number of different users who do for the same brand printers without offering any serious improvement.
Every year the only purpose of thousands of products and inventors is to add a few new ink cartridges, the latest products in the latest products, without improving users, it emphasizes the product that emphasizes the difficulty Hundreds of references instead of preparation, distribution, distribution, store, etc.
Again, the seduction of OEM manufacturers made a lot of experience in selling an ink cartridge, which is very bad and cautious to buy by specialty stores and users.