How to Install Solar Panels & Inverter For Home-Step by Step?
Rooftops, standalone structures, and building tops all have solar panels installed. It is critical to place your solar panel where it will receive the most sunlight.
Direct sunlight is what solar panels need to operate at their best.
To get the most out of your photovoltaic unit, install your UV Power solar system with your solar panels effectively under the noontime sun.
Remove any sunlight obstructions before installation. Clear your solar unit of all useless obstacles and objects, such as branches that could block sunlight. Additionally, you should follow the sun’s path in the sky to ensure nothing could cast a shadow over your solar photovoltaic system.
Solar Panel And Inverter Installation, Step-by-Step
First, the necessary mounts for the solar panels must be installed. It could be flush mounts or roof-ground mounts, depending on the situation. This base structure gives stability and support. Again, the mounting system needs a slight tilt between 18 and 36 degrees. Businesses frequently use a solar tracker to increase conversion efficiency.
Put The Solar Panels in Place
The next step is to mount the solar panels to the mounting system. Nuts and bolts are tightened to accomplish this, and care is taken to secure it properly to ensure the structure is sturdy and long-lasting.
Install Electrical Wiring
The electrical wiring comes next. Universal connectors like MC4 are used in wiring because they can be connected to all varieties of solar panels. The following series of connections between these panels is possible electrically:
- In this arrangement, the Positive (+) and Negative (-) wires of two PV modules are connected in series. This type of wiring improves the voltage match with the battery bank.
- Positive (+) to Positive (+) and negative (-) to negative (-) connections are made in this instance. The wiring voltage across each panel stays constant.
Connect The System to Solar Inverter
The next step is to connect the system to a solar inverter. Both the Positive and Negative wires from the solar panel are connected to the inverter’s Positive and Negative terminals, respectively. The grid input and solar battery are connected to the solar inverter to create electricity.
Connect The Solar Battery And Inverter
The solar battery and inverter then need to be connected. The positive terminals of the battery and the inverter are connected positively to positively and negatively to negatively. An off-grid solar system requires batteries to store backup power.
Connect The Grid to The Solar Inverter
The grid must then be attached to the Fronius solar inverter. A regular plug is used to connect to the primary power switchboard to make this connection, and the electric board that provides power to the home is connected to an output wire.
Launch The Solar Inverter
It is time to turn on the inverter switch at the primary regulator of the house now that all of the electrical wiring and connections have been made. The Fronius solar inverter has a digital display that shows statistics about the generation and use of solar equipment.
After installation, solar panels continue to produce electricity efficiently for 25 years. However, for long-term benefits, solar panels need to be installed correctly. Use this guide to understand the rules and enjoy clean and pure electricity.