How Can You Do AC Repair By Yourself?

An air conditioner may cause several problems, leading to huge expenses when you can get a professional to solve them. However, not every time you need to call a repair expert whenever you suffer any problem.

Sometimes you can quickly solve the issues by yourself. There are various tips by which you can get rid of the problems and repair your AC. Port charlotte a/C repairing services can be a great example through which you can find tips to fix the issues.

Check Your Breaker

One of the most important things you can do is to check your breaker. This is the main switch that controls power to the entire house. If you have a timer on your breaker, it’s important to ensure it’s working properly and not tripped. You can reset it or call an electrician to fix it if it is tripped.

If you’re trying to repair an AC unit, be cautious and follow proper safety procedures when working around electricity. You should always wear rubber gloves and work in an area with no sharp objects or equipment that could cause injury if touched accidentally.

Change Your Filter

The most common cause of air conditioning problems is a dirty filter. The filter will trap the dirt and dust that passes through it. The more time you leave the AC system without cleaning it, the more dirt builds up and causes problems.

If you have a central air conditioner, this is an easy fix: remove the unit’s cover, clean out whatever is inside, and then put it back on. If your AC unit has an open-air or evaporator coil, you may need to remove the entire housing to access the filter.

If you have a portable air conditioner (a window unit), look for any signs of dirt in your vents and filters. You’ll probably find them by removing the fan housing, where you’ll see small mesh screens that hold smaller filters called dust bags. These dust bags often fail after a few years of use and can clog up your system if not regularly replaced.

 Examine Thermostat

Thermostat is the significant part of the air conditioner. It controls the temperature and lets you know whether or not it is working correctly. You should always check this part before calling for an air conditioner repair since it will tell you if there is a problem with your AC unit.

It may be difficult to reach the thermostat while you are at home, but there are several methods that you can use to get up there. The simplest method is to remove the cover plate on top of your unit and then put a screwdriver into one of the holes to remove it. Then, you can remove the screws holding down any wires that come off when you remove the cover plate.

Clean It Nicely

To clean up your AC unit, you should use a dryer sheet. This is because the dryer sheets are made of lint-free fabric, and they will not damage your AC unit. You can also use a cloth to clean the unit.

If you do not have a dryer sheet or cloth, you can use a rag made from cotton. If you have used such items in the past, it is best to use them again because of their design to effectively remove dust and dirt from your AC unit.

You will also need to remove dust on top of your air conditioner by wiping it down with a damp cloth or paper towel. Use a soft cloth or paper towel so that you do not end up scratching the surface of your AC unit.

After cleaning, ensure no fingerprints are left behind using a fine-grade eraser or paper towel. If you still cannot remove all the fingerprints, use an alcohol-based cleaner instead.

Examine the Ducts

The next step is to examine the ducts. If you’re unsure where they are, use a flashlight to check for vents and other openings. Look for cracks in the walls or leaks.

If you find cracks or leaks, contact your landlord immediately. You can’t repair these problems yourself unless you are licensed to do so by the State Board of Plumbing Examiners.

If the leak is small, call a plumber to fix it. If it’s bigger than that, call an HVAC contractor. A professional can find and seal any serious leaks to warrant replacing your air conditioning unit.