Five Important Maintenance Tips For Your Reefer Trailer

If you are constantly browsing reefer trailers for sale, then chances are you probably realize that this is a great way to make a living. However, if you are new to the occupation of working with reefer trailers, then are you aware that they do require their fair share of maintenance. Yes, this medium has made the transportation of temperature-sensitive freight a reality for the past century-and-a-half. However, this is valueless if you don’t maintain them well. Here are some tips to keep in mind:

Keep the interior clean.

Your reefer trailer is going to ship a number of time-sensitive goods, so in order to do this properly you should ensure that the interior has been thoroughly cleaned after each shipment. You should start by sweeping the floors to remove any rocks, dirt, shrink wrap, leftover products, or anything else that could block the airflow of your reefer. Additionally, if your prior was meat, produce, or dairy, you are required by the FDA to wash out your trailer so that cross-contamination doesn’t occur to your new shipment. Using a pressure-washer and a detergent approved by the U.S. Department of Agriculture is your best bet. Consistently sweeping your reefer is one of the best ways to ensure you always have a clean environment.

Always do a pre-trip inspection.

Naturally, according to the Bill of Lading, everything that you haul must stay at a specific temperature. This means that it is crucial for you to perform a pre-trip inspection before you head out on the road. You should run your panel through an entire cycle just to ensure that it’s functioning normally. You should also should the exterior for various issues, including the tire pressure to reduce the risk of flats; the lights to make sure they are in working order; check to see if the trailer body is damaged; see if the engine has any unusual noises; and see if the belts have any faults or if they have any oil leaks.

There are also plenty of things you should check on the interior as well, including the air chute to make sure no holes exist; the walls for any holes or cuts; and look at the drains for any clogs.

Keep the fueling level high.

It is also important to never neglect the fuel levels in your reefer truck. The reason is because a reefer that is low on fuel will have a cooling unit that will suck up the backup, causing some major mechanical problems. This is one of the main reasons why most shippers won’t allow you to move your cargo if the tank on your truck isn’t at least three-quarters full.

Take your pulp temperature.

If you have a trailer carrying temperature, it would be an incredible asset to you if you utilized a pulp thermometer. This is one way that you can check the internal temperature of your products to make sure that the designated temperature is staying within the Bill of Lading (BOL). You should do this on at least every other pallet or box.

Keep the loading guidelines in mind.

Finally, you should be aware that each and every reefer trailer has some loading guidelines. That is, they have maximum loading heights that you must follow so that the airflow is not blocked. Follow these height and space rules closely so that all of your products remain fresh and well-preserved.

Keeping these tips in mind will ensure your success as a reefer hauler for many years to come!