The patch panel is the local area network that is the interface between optical equipment and multiple optical fibers. It is defined as the termination unit that supports networking and fiber distribution from the wiring closet to several pieces of termination equipment. It contains an assembly of port locations in an electrical system. Fiber optic technology like fiber optic splitter and fiber optic patch panel is invented to allow access to the individual fiber of cables for cross-connection. Most fiber patch panels are mounted on relay racks, but you can also mount them on the cabinet or freestanding rails. Here we will take a look at the things you need to know about fiber patch panels and their usage.
Types of fiber optic patch panels
There are two different kinds of fiber optic patch panel based on design. The first one is the wall mount, and the second one is the rackmount category. Both categories have the power to organize and protect the fiber optic connectors and cables. You can use a wall mount patch panel for direct termination of several fibers. These panels mostly include routing guides as it limits the bend radius for attaining enhanced strain-relief control. Rack mount patch panels are the panels that come in angled and flat versions.
The panels can also be distinguished on the basis of the number of ports. The common ones are panels having 12 ports, 24 ports, and 48 ports. The panels also come in varying heights like 1 unit, two units, and so on and so forth.
Connecting fiber optic cable to the fiber patch panel
Get the mounting plate and insert the adapters into it. Fix the position of the mounting plate. Keep in mind the standard termination procedure and prepare cables accordingly. Fix the gland, connect the cable and roll the excess fiber onto the spool. After completing this process, take out the protection cap and insert it into the right space in the adapter. Once attaching all the cables, secure them with a zip tie. The typical setup has a shortened cable at the front side of the patch panel, and a longer cable plugged at the backside.
Using fiber optic patch panels
A fiber optic patch panel is mainly required for two reasons. The first one is termination and the second one is better cable management. As far as the termination is concerned, it is the step where you terminate fibers on the patch panel, which requires attention.
If you are going with cable management, take the assistance of the cable managers.
You should install the device in the following manner from a top-down perspective –
Fiber patch panel
Fiber optic cable management requires a good location where you can install the hardware carefully. You have the choice to make a decision between direct cross-connection or patch panel. Arrange the routing of the cords if you are using fiber panels. If you don’t want the fiber patch cables to dangle, use the fiber cable management brackets. It will help you get a neat cabling system for efficient work.
So, get your work done quickly with fiber optic technology.