Comprehensive Guide About Air Conditioner Service Kit

An air conditioner service kit contains tools and supplies to perform maintenance and cleaning services. The tools included in an air conditioning service kit include a coil cleaning brush, two spray cans of coil cleaner, and a fin comb straining tool. The coil cleaning kit contains a coating treatment that helps keep coils self-cleaning, disperses the outdoor fresh air scent when your AC runs, and prevents drain line blockage.

Cleaning the coils

Before cleaning the coils, you must first understand the process. Ideally, you should contact an air conditioning dealer to perform this task. Alternatively, you can clean the coils yourself. Unlike hiring a professional, this process does not require much expertise. A coil brush, also called a soil brush, has bristles that are half-way between a wire brush and a hand broom. The purpose of a coil brush is to remove loose dust and hair from the coil. If you feel that the coils need cleaning more than just a surface, you can follow these steps with a fin brush.

After removing the dirty parts, you can move on to cleaning the coils. You should be careful, however, because some coils are more sensitive than others. For example, you should avoid cleaning the coils if your AC is located near a street or is located in an area where there are factories or kitchens. Additionally, you should be careful to avoid using solvents or chemicals that could damage the fins of the AC. This could lead to an electric shock or a fire.

Cleaning the condenser

An AC service air conditioner service kit will include tools to clean the condenser and drain pan. The coils are the most delicate part of the AC, and cleaning them with a soft bristled brush will reduce the risk of damaging them. The condenser and drain pan should be cleaned on a warm day. To make the task easier, coil cleaner comes in concentrated solutions and ready-to-use spray cans. You can also use a garden hose to wash the debris off of the condenser. It is important to use a non-pressure washer because pressure washing can damage the fins of the AC condenser.

Cleaning the evaporator

Before you start cleaning the evaporator, you should switch off your air conditioning unit and disconnect any electrical cords. Next, lift the access panel to expose the evaporator coil. Using a soft brush, clean away any dust or debris on the coil’s fins. Use a no-rinse air conditioner coil cleaner. It is best to leave the cleaner on for five to 20 minutes, allowing it to foam up and loosen the buildup.

If you’re unsure of how to clean the evaporator coils, you can use a mild soap and warm water. Mix the hot water and the cleanser, and apply to the coils using a garden or grip sprayer. Allow the solution to soak in and then wipe off any loose debris. Repeat as needed. Once the evaporator is clean, you can replace the air filter, clean the evaporator coils, and run your air conditioning system again. Visit https://hvacdirect.com.au/ to learn more about air conditioner service kit.

Cleaning the filters

In addition to the monthly filter replacement, air conditioning maintenance should include cleaning and changing the filter. Depending on your lifestyle, you might have to replace the filter more often. Clean the filter every two weeks or every 30 days if it’s particularly dirty or dusty. If you don’t have time to clean the filter, you should replace it every two months. If you don’t have the time to do so, you can make the process easier by purchasing replacement filters in bulk.

Before beginning the cleaning process, you must ensure that the HVAC unit is off. The air filter may be located inside multiple vents or covers. The air filter can be visible due to dirt, so make sure to remove it before cleaning. Use a hose attachment to vacuum the area around the filter. For a deeper cleaning, soak the filter in vinegar and water solution. Do not scrub the filter too hard as this can tear or damage the netting.