11 Common Mistakes to Avoid While Cleaning Concrete Floors

Concrete floors have been popular for many years. They are available in a vast range of:

  • Colors
  • Shades
  • Durability
  • Ease of maintenance
  • Practicality

With their abundance in nature, they have been among popular flooring materials for decades. They are not indestructible and are simple to care for and maintain. There are several ways to avoid mistakes you can make in taking care of the floors. The mistakes mentioned here are quite simple to avoid. Taking care of a floor is easy. It just requires a little maintenance! Common mistakes people make for their flooring are listed below.

Lack of Dust Mats:

The only enemy of all the floors is the grit. No matter what flooring material, they will wear it. If taken two diamonds and rub them against each other, they will also wear the grit. Every-day grit that is mostly carried from the shoes can contain all kinds of elements. Walking with these elements onto the floor will dull and scratch the surface.

To protect the surface, you must eliminate the grit from your shoes. One of the most essential ways is to put a dust-collecting mat outside the door. If you add this and clean your shoes before entering, there is a great chance of avoiding the floor from damage.

Walking on your Concrete Floor With Out-Door Shoes:

If you have a fancy polished floor done using a rotatory mirror polishing machine or have an expensive carpet, you surely take off your shoes. Everyone must know how to be careful with other flooring materials. Concrete floors also require getting the love and respect they deserve.

Try to put your outdoor shoes outside and avoiding getting those to interact with your floor. It is recommended to use a home slipper while entreating. This way, you cannot carry harmful grit to the floor.

Over-Mopping Of The Floor:

Some people just want to wash their floor to death. When you clean the floor using strong detergents that don’t rinse properly, there is more chance for the floor to look dull and lifeless. Mostly, everything needed is a regular dry cleaning or sweeping. Using a soft brush or microfiber floor duster or doing the vacuuming. This will also help the grit out of the floor.

Not Cleaning The Spills Right Away:

Somehow, concrete floors are treated differently as compared to carpet or wood. If you have an expensive carpet and mistakenly spill something on it, would you sit and watch it become a stain? Most probably not!

Similarly, like the carpet, if you spill something on the concrete floor, don’t wait for it to get dry and become a stain. Absorb it up straight away using a towel! You need to be careful with liquids like wine or acidic substances.

Choosing The Wrong Cleaner:

Have a visit to the supermarket and buy an appropriate cleaner. Before buying any cleaner, don’t ignore its instructions! It is important to read all the instructions mentioned there and make your choice accordingly. Even you can also purchase online from a reliable supplier.

When the floor requires a quick wash, ensure to use a neutral cleaner, one with a pH value of around 7 to 8. There are a variety of cleaners and are designed to clean gently with no harmful effect on the floor.

Not Rinsing the Floor Properly:

This is the most important yet most overlooked feature of floor cleaning. It does not matter how much effort is put into the cleaning of the floor or even how strong cleaning-chemical is used. If there is dirty water lying on the floor, when it dries, will have residues.

Rinse the mop in fresh or clean water and put the partially cleaned mop back on the floor to spread more water around. Much dirt is transferred into the mop bucket, but much gets left behind. Besides the dirt, detergent residue may also be left behind. The combination of residue and partially emulsified grime builds up to leave a dullness on the floor.

To effectively clean the floor, here are some steps to follow:

  • Change the dirty water containing the detergent.
  • Rinse out the bucket and the mop
  • Fill the bucket with fresh and clean water.
  • Go over the floor again with clean water.
  • If having a big floor, you may need to change the rinse water again.

Leaving the floor wet:

Many of the floors are smooth or even polished and they can also behave similarly to glass. So, after rinsing the floor, it is important to dry the floor down with an absorbent cotton towel or a microfiber cloth. Buffing floors dry either by hand or with a metal buffering machine. This depends on the size of your floor. It will remove all the remaining moisture.

Not Focusing On Little Stains:

If the spills are not treated immediately, they can end up with a stain. If the stain remains unattended, soon the floor will look ingrained and grubby. For small stains, try to use a poultice stain remover. Do not ignore the spills and clean them immediately or as soon as possible.

Confusing Etch Marks With Stains:

When an acid-sensitive floor like a polished marble is exposed to an acidic contaminant, results are often both a stain and an etch mark. An etch-mark is when something acidic consumes away the finely polished surface of calcium-based stones. It is confused with a stain most of the time as it is accompanied by one. The acid burns new holes in the stone. Most of the polished floors use sealers working below the surface and give no protection against the acids on the surface itself.

To spot an etch mark is by clean the stain, then rinse and allow the floor to dry check where the stain was. When the stain has gone, but at that place is a dull spot with a rougher feel and a bleached look, then this is an etch-mark. If this damage is ignored, it will leave the stone more vulnerable to staining. Small etchings can be repaired quickly using a re-polishing cream. Large-scale etching will require the services of the stone floor professional.

Applying Home Remedies and Natural Acids:

Almost in every family elders and TV experts talk about old-fashioned cleaning solutions. Do not follow these remedies as these are unsuccessful. Many household goods like vinegar and lemon juice are mostly recommended for a variety of cleaning tasks, and yes, they can be effective. They function because they are acidic and can break down a variety of minerals.

The issue is that they eat away at the surface of calcium-based and acid-sensitive stones. They not only damage entire floors by completely etching the surface, but they also stain the floor. They then apply their color or tint to the suddenly much more porous floor after performing such an excellent job of removing the polish.

Ignoring the Seal:

Don’t think that just because your stone floor was sealed when it was installed that it is having an effective seal two years later. It may have, but the floor would have seen a lot of traffic and been exposed to a variety of cleaning agents over that time. Verify the sealer’s integrity regularly.

To achieve this, pour some water on the floor and leave it there for 10 minutes. If the sealer goes on quickly and darkens the stone, then when wiped away, leaves a damp spot, it is time to reapply. It is fine if the water only leaves a faint surface shadow on the stone.

Cameron Brody

Hi there! This is Cameron Brody. I am a Working Professional. I love Blogging, Writing, videography, others. I would love to join with everybody here. On a comforting Sunday p.m. you will find me... (You can reference something that you do in your free time) Think we can be great friends? Send me a demand!