Car Wheel Alignment And Its Types

Wheel Alignment is much more than aligning the angles of your car tyres, it also refers to adjusting the suspension of your vehicle. Driving on inaccurately aligned wheels is dangerous as it can cause collisions by drifting your car to the side of the road. Wheel misalignment can also lead to increased friction between your car tyres and the road surface. This can result in rapid thinning of the treads, causing rapid loss of air pressure in the tyres and poor performance on the road.

Wheel alignment specifications are already determined by the car manufacturers, you just need to go through it and follow the instructions carefully. The car’s steering response can be maximized and the driving directions can be maintained by routinely inspecting the wheel alignment of the car. If you identify that the wheels are misaligned, immediately get them corrected and along with that, the suspension also must be adjusted.

We, at DCM Tyre and Autocentres, are widely renowned as the best provider of wheel alignment Blandford. Our technicians are highly experienced and trained, offering superior quality services to our customers at affordable rates.

Signs of Misaligned Wheels

There are certain sure-shot signs which indicate that your car tyres have become misaligned. Regularly keep on checking the wheels to get the problem solved before it turns into a major one.

  • Non-uniform treadwear
  • Vibrations in the steering wheels
  • Driving straight but the steering wheel is off-centerNon-uniform treadwear
  • Vibrations in the steering wheels
  • Tyres squealing as you turn or accelerate

If you experience any of the above-mentioned signs, you should get your car’s wheel alignment checked with an authorized and reliable technician. While preventing tyre wear is a good step towards keeping your alignment in check, the consequences of misaligned wheels can adversely affect the overall performance of the car.

Types of Wheel Alignment

Here are the different types of wheel alignment –

Toe-in/Toe-out Adjustment – The extent to which your tyres turn outward or inward when looked from above. These conditions are usually caused by damaged or worn steering components, arm bushing, or the under-, or over adjustment of the ends of tie rods. When the tyres are angled inward, it is toe-in alignment, and when both the tyres angle outwards, it’s called toe-out alignment.

Camber Adjustment – When viewed from the front of the vehicle, the tyres tilting inward are known as negative camber and if the car tyres Blandford are tilted outwards, it is positive camber. Both of these conditions indicate a misalignment in the wheels and require accurate adjustment.

Caster Adjustment – It is important to note that this setting is essential for maintaining a straight line, but it is not possible to adjust the angles by yourself. However, an accident can cause the car body to lose its formation and this angle setting can be disturbed. The angular displacement between the vertical axis of the steered wheels and the steering axis causes positive and negative caster alignment.

Four-Wheel Adjustment – It refers to a disproportion between all the four wheels on both axles concerning the ground, and the thrust angle of the car. If they are not aligned properly, the overall performance of the car will be reduced and more than that your safety will be hampered.

Thrust Line Adjustment – Thrust refers to the direction of rear wheels when pushed. This direction should completely match with the direction of the front wheels when they are positioned forward. If there’s a mismatch here it can create unwanted stress on the suspension system of your car and it will lead to a decrease in the power as well as the fuel efficiency of the car.

If you are looking to get your wheels aligned from an authorized and reliable auto care service provider. Then, head over to us as we provide the best Wheel alignment. Schedule an appointment with us today!