Boost Your Flooring Screed Mix With These Tips

Floor screeding includes the combined mixture of both sand and cement used for leveling the floors. It helps in keeping the surface plane to supports your gorgeous new flooring and heavy furniture.

Despite leveling the rough floors, it offers many benefits. Some of them are as follows:

  • It helps in removing the damps from the surface.
  • It covers the underground heating pipes that allow heat to circulate.
  • Not only this but it saves you from extra costs and energy bills.

For a floor screed mix, you should mix the components properly and evenly. To achieve a flat leveled surface requires years of experience. You must know that while you screed the mixture once, it’s difficult to remove it again. So, to get you the best outcomes, we are here with the best tips to boost your flooring screed mix.

Tips to Boost Your Flooring Screed Mix

Here are some tips that can help in boosting your flooring screed mix:

1 Set up particular area:

Get started by clearing the area that you are going to be screed. You will need to take everything from the area and can use duct tape to mark the edges before actual measurements. Also, you will need to sweep up free dust and trash with the help of a brush. It’s necessary to remove the dust and grease from the floor before starting with the project. It helps in improving your flooring screed mix.┬á

2 Remove the grease and oil:

Yes, it’s necessary to remove the grease and oil from the area. For removing these stains, you can use a scrubbing brush and detergent, but you must dry the area before proceeding with the process. In certain cases, you can apply a concrete sealer to the floor.  

3 Exclude the skirting boards:

The possible reason behind removing the skirting board is that you can cover more area for screeding. You will also need to remove the skirting boards lightly for that you can also use a chisel and hammer. You must also keep one thing into your mind that these boards cannot be used again. 

4 Pick your screed type:

During the floor screeding process, one of the crucial steps is to choose the type of floor screeds. There are many types of floor screeds that include the traditional sand, cement screeds, high-strength, fast-dry, and liquid screeds. If you are looking to use domestic and light commercial usage, the traditional floor screed will be a more suitable option for you. But, it’s better to have some research first to get the best results for hand tasks. 

5 Mix your Screed:

Instead of choosing a ready-to-use screed, you must mix on your own as it contains additives that can slow down the setting, and it may not go as quickly as you have thought. So, prefer to mix your own. Mix it well with the clean sand with a variety of grain sizes.

Steps to mix:

1 Pour the flooring screed mixture into your mixing bucket as you feel you can mix it comfortably at one time.

2 After that, combine 1 part water to 1 part Prime & Bind. 

3 Add 2 liters of the combined liquid per 20kg of screed and with the help of a drill mixer, blend until it is smooth. 

6 Put the screed:

After deciding the type of screed you require and all the ingredients get ready to mix floor screed. Next, you will need to pour it on the area or section you wish to get started with. With the help of a spade, you can smooth the screed to the section, but remember to leave an exit point for you and do not spoil the area. After completing your entire floor, you will need to wait for a while to get it dry for some time before applying the final floor covering or before walking on it.

Conclusion

Well, it’s quite a difficult job to screed a floor yourself. Sometimes, you may need a floor screeding specialist. However, with the help of these tips and methods, you can try to make screed flooring on your own if you are not able to find some. Along with these tips, you must choose a flooring screed mixture that is easy to use, cost-efficient, and provides better flooring.