Application Techniques for Ultra-Guard Fabric Guard

Ultra-Guard Fabric Guard is a highly effective fabric protection product designed to repel precipitation, discoloration, and other damage from outdoor fabrics, such as cushions for patio furniture, awnings, and outdoor upholstery. It is an innocuous, non-toxic, water-based product that can be used on various outdoor fabrics, including cotton, polyester, and acrylic.

This article will use the most effective application techniques and guidelines for Ultra-Guard Fabric Protection to ensure that your outdoor fabrics receive maximal protection.

Getting Ready for Application

Before applying Ultra-Guard Fabric Guard to your outdoor fabrics, you must clean and prepare the surfaces. This will ensure the product can completely permeate the fibers and offer optimal protection.

  • Cleanse the Material: Using a fabric cleanser or a mild detergent, thoroughly remove all grime, grit, and other debris from the fabric. Allow the fabric to dry completely after rinsing it with water.
  • Test For Small Area: Before applying the product to the complete surface, please test a small area of the fabric to ensure it will not discolor or react negatively.
  • Protect Encircling Areas: During application, protect surfaces or objects that overspray could affect.

Application Techniques

After cleaning and preparing the fabric, it is time to apply Ultra-Guard Fabric Guard. Several methods can be used to ensure thorough and uniform coverage.

  • Ultra-Guard Fabric Guard can be applied with a spray container or trigger sprayer. Maintain a 6 to 8 inches distance between the atomizer and the fabric while spraying evenly over the entire surface.
  • It is also possible to apply Ultra-Guard Fabric Guard to larger areas using a foam applicator. Working in small portions, dunk the roller in the product and uniformly distribute it over the fabric by rolling it.
  • A soft-bristled brush can apply the product to smaller areas or those that are difficult to reach. Brush the product evenly across the fabric after dipping the brush in the solution.

Application Guidelines for Ultra-Guard Fabric Guard

To assure optimal protection for your outdoor fabrics, apply Ultra-Guard Fabric Guard according to the following guidelines:

  1. Utilize in a Well-Ventilated Location: To avoid imbibing vapers or chemicals, apply the product in a well-ventilated space.
  2. Apply uniformly: Ensure the product is uniformly applied to the entire fabric surface, including seams and fissures.
  3. Allow Dry Completely: Once the product has been applied, allow it to dry completely before using it or exposing the fabric to liquids or moisture.
  4. Apply Multiple Coatings: For maximum protection, apply Ultra-Guard Fabric Guard in multiple coatings, allowing each coat to dry completely before applying the next.
  5. Apply as Necessary: Due to exposure to the elements and other environmental factors, the protection offered by Ultra-Guard Fabric Guard may degrade over time. To maintain optimum protection, reapply the product as necessary, typically every six to twelve months.


Applying Ultra-Guard Fabric Guard to your outdoor fabrics offers optimal protection against precipitation, stains, and other forms of damage. Properly preparing the surfaces and employing the proper application techniques and tips ensure uniform and comprehensive coverage and maintain maximum protection over time for your outdoor fabrics. Whether you’re protecting patio furniture cushions, outdoor upholstery, or other outdoor fabrics, Ultra-Guard Fabric Guard is a highly effective and easy-to-use solution that can help ensure the durability and attractiveness of your fabrics.