ALL STEPS YOU NEED TO KNOW ABOUT NEW HOME INSPECTION

Let’s start by making it clear that the vast majority of builders are passionate about what they do and work hard to provide their customers with the highest caliber of new homes.

The following milestones are usually where these routine checks are most likely to take place. Every owner decides to have a new home inspection in Melbourne at each point indicated here.

1. Examining the frames

The frame stage inspection is carried out after the wall and roof frames are finished and is done before the owner pays the builder for the frame stage. It is crucial to conduct a thorough evaluation of the frame’s overall integrity and quality.

While a building surveyor must approve the frame and is normally chosen by the owner, an independent inspector can review the surveyor’s conclusions and work to verify that any issues are properly handled and fixed by the builder.

2. Pre-plaster check 

Prior to the installation of plaster on the walls and ceilings, this check is carried out. It offers an additional chance to confirm that any suggested corrections as a consequence of the Frame examination have been made. Making sure the frame is straight during this examination is essential in order for the plaster to be straight as well.

This is one of the three milestones at which it is commonly acknowledged that an independent expert’s opinions are crucial for owners who do not intend to hire an inspector at each and every stage indicated here.

3. Inspection of the waterproofing

There are moist places in every house. Unfortunately, this implies that every home has the potential to sustain expensive water damage in varied degrees. The correct, undamaged membranes must be fitted in order to properly waterproof bathrooms, kitchens, toilets, laundries, and even some decking areas in order to stop potentially disastrous leaks.

This inspection typically takes place soon before wall and floor tiles are installed, covering any potentially problematic spots.

In addition to wreaking havoc on a property’s structure and contents, water damage can also have long-term effects including dangerous mould breakouts that pose a major risk to the health of residents.

Mold frequently grows covertly in walls or other spaces where leaks can go unnoticed for extended periods of time. When the owner first realizes there is a problem, it frequently already has major damage.

4. Pre-paint inspection

You are convinced that your new home is safe and completely waterproofed because it has passed its Frame inspection, plastering is finished, and components like skirting and doors have all been installed. The pre-paint examination can now begin. After all, the last thing you want is for a problem to arise after you’ve just finished decorating your home, causing all of your hard work to be entirely undone in order to address underlying issues.

For instance, brickwork needs to be thoroughly evaluated before the first coat of paint is placed. Bricks must not be damaged, cracked, or chipped. To provide your property with the best possible external protection and a finish that is structurally sound, they must be properly positioned, aligned, mortared, sealed, and rendered.

Pre-painting is one of the three stages of construction where a critical eye and knowledgeable advice are extremely essential, so keep that in mind if you don’t plan to schedule inspections at each of the milestones indicated here.

5. Fixing stage inspection

All fixtures and fittings ought to be fitted by the time a Fixing stage inspection is required. This normally covers everything from baths, basins, and taps to architraves and skirtings.

Inspectors will verify that all necessary components have been installed to the acceptable standards, and this should be done before the builder makes a claim for their Fixing stage payment. If flaws are found, you have solid proof at your disposal to back up your claim until these problems have been fixed.

6. Last-stage evaluation

The hint is clearly in the name when it comes to discussing a Final stage inspection, arguably the most important of all inspections related to the building of a new home. It is the bare minimum in terms of quality control. After your builder notifies you that practical completion has been reached and your new house is ready for occupation, it’s one last chance for you to safeguard yourself against present and potential problems. It’s also a crucial step in the process.

Prior to final handover, payment to the builder, and the official handing over of the keys, it should unquestionably be done. It provides a final chance to verify that the finished property was built in accordance with all legal requirements.

It gives the inspector a chance to examine again to see whether any previously found problems have been satisfactorily fixed and to search for any new flaws that might have appeared after the last inspection was performed.

A final stage inspection is crucial since fixing problems before you move in is easier and less stressful than doing so after you have already moved into your new home.