Hong Kong housing units face aging issues, and All of Wall provides a range of engineering services covering every district in Hong Kong. We offer comprehensive surveying and customer service, and our experienced renovation and maintenance team can serve residential, office, or commercial properties.
All of Wall provides professional renovation and maintenance services to enhance the experience of owners or residents. We offer free or phone quotations, and if the customer is satisfied with the initial quotation, we will arrange for a free on-site survey service. For inquiries about the project, you can send us photos or videos as well as the approximate size of the construction area, and our team can provide an initial quotation. Our service promise is that once the owner or resident accepts the formal quotation, if there are no additional construction or requirements, the project cost will not be adjusted upwards, giving you complete control over your budget.
All of Wall’s 7 Key Engineering Services
1. Painting Service
Painting service includes wall painting and wall leakage repair. If there is furniture at the construction site, we will first perform protection work for the furniture and then proceed with the wall painting , without the need to move the furniture.
3 Types of painting service:
A. Plastering and painting
We will remove all old paint and materials from the wall until the concrete layer, and start plastering from the concrete layer. After the plastering material is smoothed, wait for it to dry before applying the paint. This process requires a longer construction period.
B. Patch and painting
We will repair wall defects (such as unevenness), polish the wall until it is smooth, and then apply the paint. The construction period is shorter, but it is not suitable for walls facing leakage problems.
C. Direct painting
We will perform basic cleaning on the wall, and then directly apply new paint on top of the old paint. This process has the shortest construction period, but it is not suitable for walls facing leakage problems.
2. Microcement
All of Wall provides two types of microcement. The first is microcement art paint, which is only for decoration and it is suitable for living room and bedroom walls. The second type is microcement, which is waterproof and durable, and can be used for toilets, bathrooms, floors, and kitchens.
3. Spalling Service
Spalling service refers to the repair of fallen ceiling concrete. The engineering includes rust removal, rust prevention, reshaping the appearance of the spalling area, and painting. The situation of fallen ceiling concrete has certain risks, and it is recommended to handle it as soon as possible.
4. Plastering engineering service
Plastering engineering service includes laying tiles on walls and floors, and laying waterproof layers. In addition, for designs that involve hidden electrical or water pipes, we will first dig trenches in the wall or floor to hide the pipes before proceeding with plastering engineering service.
5. Waterproof engineering service
Waterproof engineering includes indoor and outdoor waterproofing. Indoor waterproofing is generally the laying or repair of waterproof layers in bathrooms or kitchens, while outdoor waterproofing includes waterproofing engineering for exterior walls and rooftops.
Main causes of rooftop leakage:
A. Aging of rooftop materials, rusting of steel bars leading to cracking, which can cause water leakage to occur.
B. Poor construction or aging of the waterproof layer, which weakens its waterproofing ability.
C. Settlement of the foundation of a detached house, leading to cracks.
D. Long-term exposure of the rooftop surface to wind, sun, and rain can cause cracking due to thermal expansion and contraction.
Types of rooftop waterproofing engineering:
A. Non-destructive rooftop waterproofing engineering
For non-destructive waterproofing engineering, the first step is to clean the rooftop surface with a high-pressure water gun, broom, etc., and remove the old damaged waterproof layer, ensuring that there is no rain for at least 3 days and that the rooftop surface is completely dry before construction. Apply rooftop waterproofing primer with a brush or roller, with a thickness of at least one millimeter for the first layer, covering the rooftop surface and walls. Wait for the primer to dry completely, then apply the waterproof coating, and wait for it to dry for 24 hours before applying a second layer of waterproof coating or spraying. Wait for the rooftop to dry completely, and then conduct a 24-48 hour immersion test to check the effectiveness of the waterproofing.
B. Destructive rooftop waterproofing engineering
If there are hollow or loose rooftop tiles or obvious cracks, it is more suitable to perform destructive rooftop waterproofing engineering. The first step is to remove the original rooftop platform, concrete floor slab, and old waterproof layer, remove all debris and garbage, ensure that the floor surface is level and completely dry, and then apply rooftop waterproofing primer with a brush or roller, with a thickness of at least one millimeter for the first layer, covering the rooftop surface and walls. Wait for the primer to dry completely, then apply the waterproof coating, and wait for it to dry for 24 hours before applying a second layer of waterproof coating or spraying. After it has dried, lay the insulation and rooftop platform, and then lay the tiles and fill the joints. Finally, conduct a 24-48 hour immersion test to check the effectiveness of the waterproofing.
6. Water and Electrical Engineering service
Water and electrical engineering service can be divided into waterworks engineering service and electrical engineering service. Waterworks engineering includes water pipe installation, pipe leakage, incoming and outgoing water systems, etc., while electrical engineering includes installation of electrical devices, lighting systems, additional electrical outlets, and electrical restoration engineering.
Waterworks engineering service includes installation or repair of water meters, burst water pipes, water leakage, exterior water pipe repairs, connection of incoming and outgoing water pipes, replacement or installation of fixtures (such as toilets, water tanks, faucets, urinals, bathtubs, or kitchen sinks), and replacement or repair of water pipes.
7. Whole-House renovation service
Whole-house renovation service includes the above-mentioned engineering, as well as custom furniture, door and window engineering, interior design, etc. All of Wall has a dedicated engineering department to monitor the progress of renovations.
All of Wall provides one-stop home renovation and maintenance services for property owners and residents in Hong Kong. If you have renovation or maintenance needs and inquiries, please feel free to contact us via WhatsApp, and our professional customer service team will arrange everything for you, allowing you to focus on your work and affairs. We look forward to your inquiry.
