After your solar installation, there are a few things you will want to do to keep your system running at its best. Among these are making sure your panels are clean, preventing a system failure, and gaining credit for the energy you export to the grid.
Con Edison’s billing and recordkeeping system
ConEdison offers two types of residential rate plans. These include the time-of-day plan, which charges different prices throughout the day. It’s a great option for those with alternative energy sources, like solar. You can also use net metering to send any unused energy back to the grid, and get credits to apply to your bill.
Solar installation services Enfield CT, Customers who participate in this program can save hundreds of dollars each month. They receive a credit for each kilowatt-hour of electricity they generate, and can use it to offset usage in months when they use more energy than they generate. If their system has been turned on, ConEdison will install a new electricity meter. Afterward, they’ll send the unused credits back to the grid, and the remaining balance will be applied to their next bill as kWh credits.
Depending on your town, the process can take up to six weeks. The most time-consuming part is obtaining all necessary permits. Once you have them, your solar panels can be put on and you’re ready to go.
Cleaning your solar panels in Enfield CT
If you have installed a solar panel on your property, it’s important to clean them on a regular basis. Solar panels are made from glass and can get dirty. Dirty panels may reduce the output of your system.
Cleaning your solar panels requires the right tools and the proper equipment. These tools can include a soft brush, squeegee, and a garden hose.
The best way to clean your PV panels is with water. You can use a garden hose to spray the panels or you can use a telescopic hose wand to give you better spraying control or Solar installation services Enfield CT.
If you have a lot of debris on your solar panels, you should consider using a soft bristled tool. This is a handy way to remove dust and dirt from your solar panels.
When cleaning your solar panels, you can also use dish soap and warm water. However, this should not be used on wiring underneath the panels. Soapy water can leave a film on your solar panel, which could lower its efficiency.
Getting credit for the energy you export to the grid
When you install a solar energy system, you can be credited for any excess energy you generate and export to the grid. The value of this credit will vary from utility to utility. Some municipal utilities even offer solar buyback programs. In order to determine whether or not your municipality offers such a program, contact your local utility.
To get credit for your exported energy, you will need to sign up for a plan. This can be traditional net metering or the new Net Billing program.
Depending on the type of plan you choose, you may or may not have to pay a monthly bill. You will also need to attest to increased usage of your solar system within 12 months of installation. During this time, you will be required to use your meter to track your energy usage.
Choosing the right plan is important because the amount of your export will depend on the time of year you are using your home. A partial buyback plan is ideal for low export ratios, and can also be more affordable than a full buyback plan.
Preventing a system failure
If you are planning to install a solar power system in your home, there are a few things you should know to prevent a system failure. Most failures are related to mechanical devices and electrical devices, but there are some other causes.
Micro-cracks are a common cause of a system failure. They are difficult to see and can reduce the efficiency of the solar panels. This can also cause a reduction in the output of the solar panels, and affect the production of electric current in the home.
Another common cause of a solar system malfunction is a DC arc fault. It can occur anywhere on the DC cabling, the solar module, or the inverter. For these reasons, it is important to make sure that the DC cabling is protected. In some cases, you may have to replace the DC connector marshaling box or DC isolator on the roof.
Breaker switches are also a possible cause of a system failure. These switches control the flow of electricity in your home and are usually tripped by overloads and surges. The breaker switch should be checked for any blown fuses or overloads.
Conclusion
Sun Devil Solarus is an acclaimed solar power supplier that has clients from residential, industrial as well as domestic backgrounds. We have the simplest to the most advanced solar panel systems that are installed by our professional staff at the designated location of clients. In addition to the solar system, all accessories like battery backups, protective meshwork for panels, and wires and cables are supplied along with the solar set-up.
