According to OSHA, 2.3 million people each year work on scaffolding.
If you have employees that work on scaffolding, you should know about the different types of scaffolding that you could use.
Using the right type will help ensure that your employees are safe, so keep reading to find out how many kinds of scaffolding there are!
Single scaffolding is also sometimes called the bricklayer’s scaffolding. It’s the most simple type of scaffolding you could have.
The support for it is placed in the ground in a row that’s parallel to whatever wall you’re working on. There are also supports that run horizontally.
These are called putlogs, and you secure them to the vertical supports and specific holes. With this interlocking, it’s a secure place to work.
If you need to go up really high, there are even extra braces installed to make sure it’s safe.
Some older types of single scaffolding are made with rope and wood. However, newer versions are made with steel for more security.
Trestle scaffolding is made out of accessories, braces, and trestles.
Instead of a simple scaffolding set up, they’re made in an H or A-frame style. These are used by painters, plasterers, and bricklayers. You also won’t need a licensed scaffolder in order to set up or take down a trestle scaffold.
However, only people who are familiar with scaffolding should set this up. The manufacturer should provide an instruction manual, and they should be followed closely to make sure they’re set up carefully.
This scaffolding can help you reach higher heights, but the higher up you go, you’ll need to provide lateral stability to the scaffolding. You’ll also need a good foundation to build it on.
These scaffolding systems also come with bracing systems as well. These are made out of lighter materials that you can easily damage if you’re not careful.
Unlike single scaffolding, double scaffolding is great for projects like stonework. Because of this, it’s often called the mason’s scaffolding.
The name comes from the second set of grounded support standards to make sure that the scaffold is sturdy and safe to use. It also has a wider footprint that is stronger than the single version.
A double scaffolding doesn’t have holes for the putlogs to support temporary structures, so you’ll need a scaffold that doesn’t rely on the wall.
The higher you go up, you’ll have the option to install additional support like rakers and cross-braces.
Cantilever scaffolding can be used only if you don’t need to place it on the ground.
This is great if the ground doesn’t offer enough support or if you are near a wall that can’t block traffic on the ground.
A series of needles that can be taken out through holes in a wall is what offers support to this scaffolding. You’ll need to take good care of this scaffolding because it can be dangerous to use.
Rolling scaffolding is normally used for smaller jobs. If you don’t have a lot of room to work on, this is a version of a slimmed-down scaffolding.
Because it’s small and easy to transport, you can move it around to wherever you need it. However, because it’s smaller the workers won’t have as much room to work on it either.
These scaffolds are more focused on reaching heights rather than widths, so you’ll be able to use these for location-specific work that you need to do on a higher floor.
Suspending scaffolding normally hangs from a roof so that you can work on projects that are higher up on the building.
This scaffolding is a solid platform that hangs over the side of a building. To support itself, it relies on the roof.
This is great for jobs that are above a street or need access to the roof or higher up on the house. You can also use it to do masonry replacements or do specific jobs on the house.
This scaffolding can be dangerous because it just hangs in the air, so it’s best to have a professional install it and ensure that it works properly.
Mast Climbing Scaffolding
Mast climbing scaffolding is similar to suspended climbing because it lets people reach all kinds of different heights.
However, instead of wires suspending it, the scaffold is actually on the ground. This is great if you need to bring heavy loads up with you because it can support all the extra weight without collapsing.
They don’t need a lot of space at the bottom, so you can use these even if you don’t have a lot of ground to work with.
Because they let you reach new heights, they’re great for building a block or brick wall. You can also use it to do specific touchups that are all at different heights.
If you’re interested in using any of these types of scaffolding, make sure that you check out South Pacific Scaffolding!
Discover More About the Different Types of Scaffolding
These are only a few of the different types of scaffolding, but there are many more out there!
We know that running a business and doing trades work can be overwhelming at times, but we’re here to help you out and fill you in on everything you need to know!
If you enjoyed this article, make sure that you explore our website to find more articles just like this one.