7 most common plumbing problems and how to avoid them

 What happens in your home when the faucet starts to leak or the toilet starts to run?

 How about when the kitchen sink clogs drip from the pipes?

 For many people, common household problems involve calls to the local handyman or endless weekend hours in an attempt to fix seemingly minor issues.

 Fortunately, some of the plumbing problems we all face can be solved with a little skill and willpower.

 If you want to know if your plumbing problem is simple or complex, you will find some great online resources that are helpful and comprehensive.

 Here are some common plumbing problems and questions, along with some simple solutions.

 1. Drainage clogs

 It is perhaps the most common plumbing problem experienced in your home. Clogged drains can be extremely unpleasant. Bathroom sink, shower drain, lavatory, or other drains in the home that moves well slowly or is completely clogged.

 Instead of trying to solve your drainage problem yourself and potentially create more plumbing problems, be sure to turn to Heroservices.com – the page that connects you to the best plumbing services in Panama.

 2. Leaky faucets

 It may happen that, at any given moment, a pipe breaks or the tap drips. Most people don’t act immediately to fix a faucet, and a leaky faucet can waste many dollars on the water in a short amount of time.

 The faucet may leak because the washers are on or because there is a corroded valve. The valve acts as a connector between the faucet and the spout compression mechanism. If your washer and valve are intact, then you may have a problem with your ring.

3. Unclog the pipes

 A recurring concern relates to blocked pipes. In particular, this can lead to reduced flow, bad odors, and reflux. The culprits can be tartar, grease, or any other residue (hair, nails, etc.). Here’s how to clear the water pipes.

 First, to prevent the build-up of fat, regular maintenance is essential. Each month, therefore, pour one to two liters of boiling water in each pipe (sink, sink, bathtub, shower, etc.). This will dissolve all fat, such as soap, cream, edible fat, etc.

 Then, to unclog pipes, there are several methods. To manually unclog a sink/sink or toilet you can use:

 A suction cup. Place it tightly over the drain and pour water to cover the rubber. Press down on the suction cup vigorously, then allow it to return to its original position. Under the effect of the pressure, it will remove the clog.

 A ferret. This long, flexible metal rod has a corkscrew end. It reaches a plug that is on the other side of the pipe bend. To do this, simply slide the ferret into the duct and move it until you feel resistance. Once the residue is attached, take the ferret out of the water and throw the cork in the trash.

 And if your attempts are unsuccessful, you can then try to dissolve the plug with suitable products:

 Chemical unblockers dissolve a plug that is resistant to boiling water. Be careful, protect yourself and strictly follow the instructions, because these products are abrasive. Then rinse your pipes well, letting the water run for a few minutes.

 Graphite is a multi-purpose cleaner that can remove rust and mineral deposits, such as limescale.

 Caustic soda flakes (over which one quart of boiling water is poured) are a non-chemical solution for ridding pipes of organic matter. It will not alter ceramic and tubing but is not suitable for flexible fittings, acrylic, or white PVC. Here again, protect yourself from splashes and rinse thoroughly after the process.

5. Clean a dirty water heater:

 If the water is hard, ferrous, or sulfurous, the build-up of these elements in a water heater can reduce its efficiency, clog it or even cause it to rust. Not to mention the obvious lack of hygiene … To avoid this, you must clean the inside!

 To do this, cut off the power supply to your water heater. Then connect a flexible hose (such as a garden hose) to the balloon’s drain valve and place its end in a bung to allow the water to drain. Finally, let the water heater drain completely. The water will flow on its own, carrying the deposits with it.

 6. Repair a leak

 Water leaks are extremely common plumbing problems that can occur on a pipe, sink, toilet, washer, hot water tank, etc. Some leaks seem harmless, but it’s best to fix them before they get worse!

 You must first turn off the general water supply. Then try to pinpoint exactly where the leak is. By identifying where the water is flowing, the problem will be fixed more quickly! Finally, contact a professional plumber to fix the leak. He will establish an estimate and perform his service as soon as possible. Choose a team of certified plumbers who travel all over Montreal.

7. Leaks in pipes:

 If you have an old house that hasn’t had its plumbing in a few years, you’re more likely to have water leaks. These can be found on hot water tanks or in the moldings of your home itself. This could be due to loose joints or the dilapidated condition of your home.

 Over the years, faucets can also lose performance. Drops can escape, impacting not only your bills but your comfort as well. There is nothing like the sound of falling water to escape sleep.

 8. Bad odors in the pipes:

Bad odors in the pipes are also real problems. These may be the first signs of a pipe blockage, for information. But it can also be a simple maintenance concern.

 As a rule, bad smells are most often felt in the kitchen. And for good reason, you almost never take the time to get rid of food scraps before rinsing.

 Lack of water pressure

 In most houses, especially those with two floors, homeowners also have to deal with a lack of water pressure in certain areas of the house. This is a flow-setting issue that can have a big impact on the comfort of the home.

9. A problem in the toilet bowl:

 But piping problems are not just about water distribution. They can also be found in toilet bowls. A hunt that is difficult to fill, bowls that flow constantly, leaks of all kinds: everyone has their own concern. It could be because of defective components or even the old age of the equipment. You will especially face this kind of problem if you have opted for a low-end toilet bowl.

Did you know that leaky toilets can waste up to 4-5 gallons of water per minute?

 Frequently, issues related to the use of the toilet lead to an increase in the water bill. If your water bill goes up, the first thing to do is to check that the toilet is not working or leaking.

 If the toilet is not working, check that the fill valve, located inside the tank, does not overflow through the overflow pipe. Connect a small tube to it and confirm that the water level is about an inch below the overflow tube or at the manufacturer’s mark inside the tank.

 The last thing to check is the clapper. For a quick check, add a few drops of food coloring to the water reservoir and let it sit for about 15 to 20 minutes. Next, check the water in the bowl and see if it has changed color. If so, it’s time to change the clapper.

 If these tips don’t help, we highly recommend

 And finally, in showers or washrooms, or even in the kitchen, taps can leak everywhere instead of giving a single waterfall. This is a fairly common problem, usually due to lime fouling the latter.


 To avoid problems with leaks or blocked pipes, it is therefore essential to regularly and correctly maintain all your pipes.

Plumbing is an important element in construction. In the event of a problem at this level, it is important to act quickly and correctly, in particular, to avoid water damage. Here are the main plumbing problems and tips on how to avoid them. For more information, you can visit https://heroservices.com/pumping/